輸出貿易管理令 - 英語 - 日本法令外国語訳DBシステム

日本語英語日英併記日英対照表

テキスト (.txt) Word (.docx) PDF (.pdf) TMX (.tmx) XML (.xml)

Cabinet Order on Export Trade Control

Cabinet Order No. 378 of December 1, 1949

The Cabinet hereby enacts this Cabinet Order based on the provisions of Articles 26, 48, 49, 67, and 69 of the Foreign Exchange and Foreign Trade Control Act (Act No. 228 of 1949) and the provisions of paragraph (4) of the Supplementary Provisions, and for the purpose of implementing that Act.

(Permission to Export)

Article 1(1)Exporting certain kinds of goods to certain regions specified by Cabinet Order, as provided for in Article 48, paragraph (1) of the Foreign Exchange and Foreign Trade Act (Act No. 228 of 1949; referred to as "the Act" below), means the export of the goods listed in the middle column of Appended Table 1 to the regions listed in the right-hand column of that table.

(2)A person seeking permission under Article 48, paragraph (1) of the Act must file an application for permission in accordance with the procedure specified by Order of the Ministry of Economy, Trade and Industry.

(Approval of Exports)

Article 2(1)A person seeking to export goods in a way that falls under any of the following items must obtain the approval of the Minister of Economy, Trade and Industry in accordance with the procedures specified by Order of the Ministry of Economy, Trade and Industry:

(i)exporting goods listed in the middle column of Appended Table 2 to the regions listed in the right-hand column of that table;

(i)-2exporting goods listed in Appended Table 2-2 (excluding goods listed in the middle column of rows 1, 36, 39 through 41, and 43 through 45 of Appended Table 2) to North Korea;

(i)-3exporting goods listed in Appended Table 2-3 (excluding item (i)-2, item (ii), 32. through 85., item (ii)-2, and item (iii)) (excluding goods listed in the middle column of rows 20 through 21-3, 25, 35 through 35-4, 44, and 45 of Appended Table 2) to Belarus;

(i)-4exporting goods listed in Appended Table 2-3 (excluding goods listed in the middle column of rows 1, 20 through 21-3, 25, 35 through 37, 40, 41, and 43 through 45 of Appended Table 2) to Russia;

(i)-5exporting goods (excluding goods listed in the middle column of Appended Table 2 (excluding row 34)) to Ukraine (limited to the areas of Donetsk Oblast and Luhansk Oblast specified by public notice from the Minister of Economy, Trade and Industry; the same applies in Article 4, paragraph (2), item (ii), (f));

(i)-6exporting goods (excluding goods listed in the middle column of Appended Table 2 (excluding row 34) and Appended Table 2-3 (excluding item (i)-2, item (ii), 32. through 85., item (ii)-2, and item (iii))) to Belarus (limited to exporting through direct or indirect transactions with a person specified by public notice from the Minister of Economy, Trade and Industry);

(i)-7exporting goods (excluding goods listed in the middle column of Appended Table 2 (excluding row 34) and Appended Table 2-3) to Russia (limited to exporting through direct or indirect transactions with a person specified by public notice from the Minister of Economy, Trade and Industry);

(ii)exporting goods under a contract for trade under a processing deal through which the relevant person entrusts a contractor in a foreign country with processing undertaken in that or another foreign country (limited to cases in which all or part of the processing under that contract constitutes the processing specified by the Minister of Economy, Trade and Industry (referred to as "designated processing" below)) (the relevant goods are limited to raw materials that will be used under that contract through a processing deal that constitutes designated processing; that the Minister of Economy, Trade and Industry specifies based on the categories of designated processing; and that are associated with the processing that constitutes the relevant designated processing).

(2)In order to grant approval under item (i) of the preceding paragraph for the goods listed in the middle column of rows 30 and 33 of Appended Table 2, the Minister of Economy, Trade and Industry must obtain the consent of the Minister of Agriculture, Forestry and Fisheries in advance.

(3)The Minister of Economy, Trade and Industry is to grant approval under paragraph (1) on the goods listed in the middle column of rows 35-2, (ii) and 43 of Appended Table 2 only if permission or confirmation for their export has been obtained under other laws and regulations.

Article 3Deleted

(Special Provisions)

Article 4(1)The provisions of Article 48, paragraph (1) of the Act do not apply in the following cases; provided, however, that this is not the case for the goods listed in the middle column of row 1 of Appended Table 1:

(i)if a person seeks to export goods which have landed in Japan temporarily and been forwarded with a bill of lading (including airway bills and other instruments equivalent to bills of lading) to a region outside Japan (referred to as "temporarily landed goods bound for foreign countries" in items (iii) and (iv)) (except for cases falling under any of the following, if the person seeks to export goods to a region other than those stated in Appended Table 3):

(a)if it has been specified by Order of the Ministry of Economy, Trade and Industry as a case in which the goods are likely to be used for the development, manufacture, use, or storage (referred to as "development, etc." in (b) and item (iii)) of a nuclear weapon; of a chemical warfare agent, a biological warfare agent, or a device for spraying one of these agents; or of a rocket or unmanned aerial vehicle capable of transporting one of these, with a range or flight range of 300 km or more (referred to as an "NBC or associated device" in (b), item (iii), and Article 14 below);

(b)if the person has been notified by the Minister of Economy, Trade and Industry that an application for permission should be filed because the goods are likely to be used for the development, etc. of an NBC or associated device;

(ii)if a person seeks to export any of the following goods:

(a)vessel or aircraft supplies to be used for foreign vessels or aircraft;

(b)aircraft components as well as machines and apparatus mounted on aircraft to be used for the safe arrival and departure or navigation of aircraft and components, which need repair and are exported without charge;

(c)goods sent by international organizations, which are exempted from export restrictions under a treaty or other international agreement that Japan has signed;

(d)goods for public use sent to Japanese embassies, legations, consulates, and other equivalent facilities;

(e)goods imported by a person without charge, on the condition that they will also be export without charge, as specified by public notice from the Minister of Economy, Trade and Industry;

(f)goods imported by a person without charge, on the condition that they will also be exported without charge, as specified by public notice from the Minister of Economy, Trade and Industry;

(iii)if a person seeks to export goods listed in row 16 of Appended Table 1 (excluding temporarily landed goods bound for foreign countries) to a region stated in the right-hand column of the same row, and this does not fall under any of the following (and does not fall under any of (a), (b), or (d), if the person seeks to export goods to a region other than those stated in Appended Table 3-2):

(a)if it has been specified by Order of the Ministry of Economy, Trade and Industry as a case in which the goods are likely to be used for the development, etc. of an NBC or associated device;

(c)if it has been specified by Order of the Ministry of Economy, Trade and Industry as a case in which the goods are likely to be used for the development, manufacture, or use of the goods listed in the middle column of row 1 of Appended Table 1 (excluding goods falling under the category of an NBC or associated device; the same applies in (d));

(d)if the person has been notified by the Minister of Economy, Trade and Industry that an application for permission should be filed because the goods are likely to be used for the development, manufacture, or use of the goods listed in the middle column of row 1 of Appended Table 1;

(iv)if a person seeks to export goods listed in the middle column of rows 5 through 13 or row 15 of Appended Table 1, the total value of which is not more than 1,000,000 yen (or 50,000 yen in the case of goods listed in Appended Table 3-3) (excluding temporarily landed goods bound for foreign countries) to a region other than those listed in Appended Table 4 (this is limited to cases which do not fall under any of (a), (b), or (d) of the preceding item (iii), if that person seeks to export goods to a region other than those listed in Appended Table 3 (and also cases that do not fall under any of (a) through (d) of that item, if that person seeks to export goods to the regions listed in Appended Table 3-2 (excluding Iraq and North Korea)).

(2)The provisions of Article 2 do not apply in the following cases; provided, however, that this is not the case for goods listed in the middle column of rows 37 through 41 and rows 43 through 45 of Appended Table 2:

(i)if a person seeks to export goods which have landed temporarily; provided, however, that this excludes a case in which a person seeks to export goods listed in the middle column of rows 1, 35, and 35-2 of Appended Table 2 (excluding goods listed in the middle column of rows 1 and 35-2, (i) of that table that have been specified by public notice from the Minister of Economy, Trade and Industry);

(ii)if a person seeks to export goods listed in Appended Table 5; provided, however, that this excludes a case in which a person seeks to export the following goods:

(a)goods listed in the middle column of row 1, in row 35-3, (i) and (vi), and in the middle column of rows 35-4 and 36 of Appended Table 2 (for the goods listed in row 35-3, (i) and (vi) of that table, this is limited to those specified by public notice from the Minister of Economy, Trade and Industry);

(b)goods listed in Appended Table 5, item (ii), which are also listed in the middle column of rows 35 and 35-2 of Appended Table 2;

(c)goods listed in Appended Table 5, items (ii) and (iii), which are also listed in Appended Table 2-2 and would be exported to North Korea;

(d)goods listed in Appended Table 5, item (ii), which are also listed in Appended Table 2-3 and would be exported to Belarus;

(e)goods listed in Appended Table 5, item (ii) and also listed in Appended Table 2-3, and goods listed in Appended Table 5, item (iii) and also listed in Appended Table 2-3, item (iii), which would be exported to Russia;

(f)goods listed in Appended Table 5, item (ii), which would be exported to Ukraine;

(g)goods listed in Appended Table 5, item (ii), which would be exported to Belarus or Russia (limited to those involved in the export prescribed in Article 2, paragraph (1), item (i)-6 or item (i)-7);

(iii)if a person prescribed in Article 10, paragraph (2) of the Act on Waste Management and Public Cleansing (Act No. 137 of 1970) (including as applied mutatis mutandis pursuant to Article 15-4-7, paragraph (1) of that Act) seeks to export goods listed in row 35-2, (2) of Appended Table 2; provided, however, that this excludes a case in which a person seeks to export goods listed in row 35-3, (i) and (vi) of Appended Table 2 (limited to those specified by public notice from the Minister of Economy, Trade and Industry); and

(iv)if any person stated in the left-hand column of Appended Table 6 seeks to export goods listed in the right-hand column upon departure from Japan by personally carrying the goods or by sending them separately after filing a declaration with Customs; provided, however, that this excludes a case in which a person seeks to export goods listed in the middle column of row 1, in row 35-3, (i) and (vi), and in the middle column of row 35-4 of Appended Table 2 (for goods listed in row 35-3, (i) and (vi) of that table, limited to those specified by public notice from the Minister of Economy, Trade and Industry), a case in which a person departing from Japan after having entered temporarily seeks to export goods listed in row 36 of that table (excluding those specified by public notice from the Minister of Economy, Trade and Industry), and a case in which the crew member of a vessel or aircraft seeks to export goods listed in Appended Table 2-2 to North Korea and export goods listed in Appended Table 2-3, item (iii) to Russia.

(3)Beyond the cases prescribed in the preceding paragraph, the provisions of Article 2, paragraph (1), item (i) do not apply if a person seeks to export goods with a total value not exceeding the amount stated in the right-hand column of Appended Table 7 for the corresponding categories of goods listed in the middle column of that table.

(4)Beyond the cases prescribed in paragraph (2), the provisions of Article 2, paragraph (1), item (ii) do not apply if a person seeks to export goods the total value of which is not more than 1,000,000 yen.

(Confirmation by Customs)

Article 5(1)As instructed by the Minister of Economy, Trade and Industry, Customs must confirm that a person seeking to export goods has obtained permission under Article 48, paragraph (1) of the Act or approval under Article 2, paragraph (1) or is not required to obtain the relevant permission or approval.

(2)Having made a confirmation under the preceding paragraph, Customs is to inform the Minister of Economy, Trade and Industry of the results of the confirmation as provided by Order of the Ministry of Economy, Trade and Industry.

Article 6Deleted

(Review of Exports)

Article 7Based on the reports collected under Article 11, the Minister of Economy, Trade and Industry is to examine whether or not the relevant goods are exported in accordance with the provisions of laws and regulations.

(Valid Period of Permission and Approval)

Article 8(1)Permission prescribed in Article 48, paragraph (1) of the Act and approval prescribed in Article 2, paragraph (1) is to be valid for six months from the date of permission or approval.

(2)If it is found to be particularly necessary to do so, the Minister of Economy, Trade and Industry may set a valid period of permission or approval different from the period referred to in the preceding paragraph or extend that period.

(Notification of Sanctions for Violation of Laws and Regulations)

Article 9Having made a disposition under Article 53, paragraph (1) or (2) of the Act, the Minister of Economy, Trade and Industry is to notify Customs to that effect without delay.

(Employees)

Article 10Employees specified by Cabinet Order, as provided in Article 53, paragraph (4), item (i) of the Act refer to any employee who falls under any of the following:

(i)a person that manages the operations at a business office or other office or any other equivalent person specified by Order of Ministry of Economy, Trade and Industry; or

(ii)a person that manages operations that have been prohibited pursuant to Article 53, paragraph (1) or (2) of the Act or any other person specified by Order of Ministry of Economy, Trade and Industry as being equivalent (excluding those stated in the preceding item).

(Reports)

Article 11Within the limits necessary for the enforcement of the Act (limited to Chapter VI and Chapter VI-3) and this Cabinet Order, the Minister of Economy, Trade and Industry may collect the necessary reports from a person seeking to export goods, a person that has exported goods, a person that has produced those goods, or any other person concerned.

(Delegation of Authority)

Article 12The following authority of the Minister of Economy, Trade and Industry is to be delegated to the Directors-General of Custom-Houses:

(i)the authority to grant approval under Article 2, paragraph (1) with respect to goods listed in the middle column of rows 39 through 41 and row 43 of Appended Table 2 (excluding goods listed in the middle column of row 43 of that table that have been specified by public notice from the Minister of Economy, Trade and Industry);

(ii)the following stated authority, within the scope designated by the Minister of Economy, Trade and Industry:

(a)the authority for approval under Article 2, paragraph (1) with respect to goods the price of which does not need to be settled in full by a means of payment;

(b)the authority for approval under Article 2, paragraph (1) with respect to goods which have been carried to, stored in, or transported to bonded areas and are to be shipped back from the bonded areas;

(c)the authority under Article 67, paragraph (1) of the Act to attach conditions to approval referred to in (a) or (b);

(d)the authority to extend the valid period of permission under Article 48, paragraph (1) of the Act or approval under Article 2, paragraph (1), pursuant to Article 8, paragraph (2).

(Acts of Government Organs)

Article 13(1)The provisions of this Cabinet Order do not apply if the Minister of Economy, Trade and Industry exports goods.

(2)The provisions of Article 5 apply mutatis mutandis to the case referred to in the preceding paragraph.

(Goods That Are Especially Likely to Be Used for the Development of an NBA or Associated Device)

Article 14The goods that are specified by Cabinet Order, as prescribed in Article 69-6, paragraph (2), item (ii) of the Act, means those stated in row 1 (excluding (v), (vi), and (x) through (xii)) of Appended Table 1 and those stated in the middle column of rows 2 through 4 of that table (excluding an NBC or associated device).

Supplementary Provisions [Extract]

(1)This Cabinet Order comes into effect on the date of promulgation.

(2)A person that has obtained permission for export under the provisions of an order based on the Order on Temporary Measures for Trade (Imperial Order No. 328 of 1946) before this Cabinet Order comes into effect is to be deemed to have obtained approval referred to in Article 1, paragraph (1).

(3)Up until April 13, 2023, the term "goods listed in Appended Table 2-2 (excluding goods listed in the middle column of rows 1, 36, 39 through 41, and 43 through 45 of Appended Table 2) to North Korea" in Article 2, paragraph (1), item (i)-2 is deemed to be replaced with "of goods (excluding goods listed in the middle column of rows 1, 19 through 21-3, 25, 30, 33, 35 through 41, and 43 through 45 of Appended Table 2-1) to North Korea"; the term "goods listed in Appended Table 5, items (ii) and (iii)" in Article 4, paragraph (2), item (ii), (c) is deemed to be replaced with "goods listed in Appended Table 5, item (ii), which are exported to North Korea, and goods listed in item (iii) of that table"; the term "of that table" in paragraph (3) of that Article is deemed to be replaced with "of that table; provided, however, that this is not limited to goods which are exported to North Korea"; and the term "Articles 2 and 4" in Appended Table 2-2 is deemed to be replaced with "Article 4".

Supplementary Provisions [Cabinet Order No. 13 of January 28, 1950]

This Cabinet Order comes into effect on the date of promulgation.

Supplementary Provisions [Cabinet Order No. 122 of May 4, 1950]

This Cabinet Order comes into effect on May 8, 1950.

Supplementary Provisions [Cabinet Order No. 207 of June 28, 1950] [Extract]

(1)This Cabinet Order comes into effect on June 30, 1950.

Supplementary Provisions [Cabinet Order No. 306 of October 9, 1950]

This Cabinet Order comes into effect on the date of promulgation.

Supplementary Provisions [Cabinet Order No. 375 of December 29, 1950] [Extract]

(1)This Cabinet Order comes into effect on January 1, 1951.

Supplementary Provisions [Cabinet Order No. 200 of June 8, 1951] [Extract]

(1)This Cabinet Order comes into effect on the date of promulgation.

Supplementary Provisions [Cabinet Order No. 301 of September 21, 1951]

This Cabinet Order comes into effect on September 25, 1951.

Supplementary Provisions [Cabinet Order No. 384 of December 22, 1951] [Extract]

(1)This Cabinet Order comes into effect on January 1, 1952.

(2)Prior laws continue to govern the application of penal provisions to any act a person made before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 306 of July 31, 1952] [Extract]

(1)This Cabinet Order comes into effect on August 1, 1952.

(4)The Cabinet Order Concerning Reports of Foreign Exchange Banks and Money Exchangers, the Cabinet Order on Export Trade Control, the Cabinet Order on Import Trade Control, the Foreign Exchange Control Order, or the Foreign Exchange Control Commission Rules, Order of the Prime Minister's Office, Order of the Ministry of Finance, or Order of the Ministry of International Trade and Industry based on the Cabinet Order Concerning Temporary Special Provisions of the Foreign Exchange Control Order upon Implementation of the Administrative Agreement under Article III of the Security Treaty between Japan and the United States of America, or an Order of the Prime Minister's Office or Order of the Ministry of International Trade and Industry, all of which are effective at the time this Cabinet Order comes into effect and have not yet been amended, are to be effective, after this Cabinet Order comes into effect, as the Order Concerning Reports of Foreign Exchange Banks and Money Exchangers, the Cabinet Order on Export Trade Control, the Cabinet Order on Import Trade Control, the Foreign Exchange Control Order, or the relevant order of the competent ministry, Order of the Ministry of Finance, or Order of the Ministry of International Trade and Industry based on the Cabinet Order Concerning Temporary Special Provisions of the Foreign Exchange Control Order upon Implementation of the Administrative Agreement under Article III of the Security Treaty between Japan and the United States of America, or an Order of the Ministry of Finance or Order of the Ministry of International Trade and Industry, all of which have been amended.

Supplementary Provisions [Cabinet Order No. 367 of August 26, 1952] [Extract]

(1)This Cabinet Order comes into effect on September 1, 1952.

Supplementary Provisions [Cabinet Order No. 500 of December 26, 1952]

This Cabinet Order comes into effect on January 1, 1953.

Supplementary Provisions [Cabinet Order No. 77 of April 10, 1954]

This Cabinet Order comes into effect on the date of promulgation.

Supplementary Provisions [Cabinet Order No. 119 of June 1, 1954]

This Cabinet Order comes into effect on the date of promulgation.

Supplementary Provisions [Cabinet Order No. 150 of July 30, 1955]

This Cabinet Order comes into effect on August 10, 1955.

Supplementary Provisions [Cabinet Order No. 328 of December 15, 1955]

This Cabinet Order comes into effect on December 21, 1955.

Supplementary Provisions [Cabinet Order No. 219 of March 22, 1956] [Extract]

(1)This Cabinet Order comes into effect on April 1, 1956.

Supplementary Provisions [Cabinet Order No. 341 of November 14, 1956] [Extract]

(1)This Cabinet Order comes into effect on November 16, 1956.

Supplementary Provisions [Cabinet Order No. 255 of August 28, 1958] [Extract]

(1)This Cabinet Order comes into effect on September 1, 1958.

Supplementary Provisions [Cabinet Order No. 339 of December 22, 1958]

This Cabinet Order comes into effect on December 25, 1958.

Supplementary Provisions [Cabinet Order No. 77 of March 31, 1959]

This Cabinet Order comes into effect on April 6, 1959.

Supplementary Provisions [Cabinet Order No. 284 of September 1, 1959]

This Cabinet Order comes into effect on September 7, 1959.

Supplementary Provisions [Cabinet Order No. 327 of October 30, 1959]

This Cabinet Order comes into effect on November 2, 1959.

Supplementary Provisions [Cabinet Order No. 108 of April 25, 1960]

This Cabinet Order comes into effect on May 1, 1960.

Supplementary Provisions [Cabinet Order No. 135 of May 30, 1960] [Extract]

(1)This Cabinet Order comes into effect on June 6, 1960.

Supplementary Provisions [Cabinet Order No. 157 of June 10, 1960] [Extract]

(1)This Cabinet Order comes into effect on July 1, 1960.

Supplementary Provisions [Cabinet Order No. 163 of June 20, 1960]

This Cabinet Order comes into effect on June 23, 1960.

Supplementary Provisions [Cabinet Order No. 219 of July 28, 1960]

This Cabinet Order comes into effect on August 1, 1960.

Supplementary Provisions [Cabinet Order No. 279 of October 25, 1960] [Extract]

(1)This Cabinet Order comes into effect on November 1, 1960.

Supplementary Provisions [Cabinet Order No. 316 of December 28, 1960]

(1)This Cabinet Order comes into effect on January 10, 1961.

(2)The provisions of Article 1, paragraph (1), item (i)-2 after the amendment do not apply to the export of goods to Iran or Iraq conducted as approved or permitted pursuant to Article 1, paragraph (1) or Article 2, paragraph (1) prior to the amendment.

Supplementary Provisions [Cabinet Order No. 127 of May 4, 1961] [Extract]

(1)This Cabinet Order comes into effect on May 8, 1961.

Supplementary Provisions [Cabinet Order No. 264 of July 17, 1961]

This Cabinet Order comes into effect on July 20, 1961.

Supplementary Provisions [Cabinet Order No. 380 of November 20, 1961]

This Cabinet Order comes into effect on November 25, 1961.

Supplementary Provisions [Cabinet Order No. 416 of December 21, 1961]

This Cabinet Order comes into effect on December 23, 1961.

Supplementary Provisions [Cabinet Order No. 432 of December 28, 1961] [Extract]

(1)This Cabinet Order comes into effect on January 1, 1962.

Supplementary Provisions [Cabinet Order No. 398 of October 1, 1962]

This Cabinet Order comes into effect on the date of promulgation.

Supplementary Provisions [Cabinet Order No. 126 of April 12, 1963] [Extract]

(1)This Cabinet Order comes into effect on April 15, 1963.

Supplementary Provisions [Cabinet Order No. 177 of May 29, 1963]

This Cabinet Order comes into effect on May 31, 1963.

Supplementary Provisions [Cabinet Order No. 240 of July 8, 1963]

This Cabinet Order comes into effect on July 12, 1963.

Supplementary Provisions [Cabinet Order No. 89 of March 31, 1964] [Extract]

(1)This Cabinet Order comes into effect on April 1, 1964.

Supplementary Provisions [Cabinet Order No. 178 of June 8, 1964]

This Cabinet Order comes into effect on June 10, 1964.

Supplementary Provisions [Cabinet Order No. 181 of June 15, 1964] [Extract]

(1)This Cabinet Order comes into effect on July 1, 1964.

Supplementary Provisions [Cabinet Order No. 276 of August 24, 1964]

This Cabinet Order comes into effect on September 1, 1964.

Supplementary Provisions [Cabinet Order No. 387 of December 28, 1964]

This Cabinet Order comes into effect on the date of promulgation.

Supplementary Provisions [Cabinet Order No. 245 of July 5, 1965]

This Cabinet Order comes into effect on the date of promulgation; provided, however, that the provisions adding row 174-3 after row 174-2 of Appended Table 1 come into effect on July 15, 1965.

Supplementary Provisions [Cabinet Order No. 332 of October 5, 1965]

This Cabinet Order comes into effect on November 15, 1965; provided however, that the provisions amending row 26 of Appended Table 1, the provisions amending row 30 of that table, the provisions amending rows 72 and 73 of that table, the provisions amending rows 101 and 102 of that table, the provisions amending row 105 of that table, the provisions amending row 112 of that table, and the provisions amending row 116 of that table come into effect on the date of promulgation, and the provisions amending row 4 of that table and the provisions amending row 9 of that table come into effect on October 15, 1965.

Supplementary Provisions [Cabinet Order No. 350 of November 5, 1965] [Extract]

(1)This Cabinet Order comes into effect on November 8, 1965.

Supplementary Provisions [Cabinet Order No. 353 of November 11, 1965] [Extract]

(1)This Cabinet Order comes into effect on December 1, 1965.

Supplementary Provisions [Cabinet Order No. 366 of December 2, 1965]

This Cabinet Order comes into effect on December 9, 1965.

Supplementary Provisions [Cabinet Order No. 10 of February 3, 1966]

This Cabinet Order comes into effect on February 10, 1966.

Supplementary Provisions [Cabinet Order No. 23 of February 28, 1966]

This Cabinet Order comes into effect on March 5, 1966.

Supplementary Provisions [Cabinet Order No. 302 of September 1, 1966]

This Cabinet Order comes into effect on September 15, 1966; provided, however, that the provisions amending rows 33, 88, 89, 119, 133, and 133-2 through 133-4 of Appended Table 1 come into effect on the date of promulgation.

Supplementary Provisions [Cabinet Order No. 345 of October 7, 1966]

This Cabinet Order comes into effect on October 17, 1966.

Supplementary Provisions [Cabinet Order No. 361 of November 2, 1966]

This Cabinet Order comes into effect on November 7, 1966.

Supplementary Provisions [Cabinet Order No. 389 of December 24, 1966]

This Cabinet Order comes into effect on December 26, 1966.

Supplementary Provisions [Cabinet Order No. 26 of March 2, 1967]

This Cabinet Order comes into effect on March 15, 1967.

Supplementary Provisions [Cabinet Order No. 31 of March 15, 1967]

This Cabinet Order comes into effect on March 22, 1967.

Supplementary Provisions [Cabinet Order No. 368 of December 25, 1967]

This Cabinet Order comes into effect on the date of promulgation; provided, however, that the provisions amending rows 30, 41-2, and 133 of Appended Table 1 come into effect on January 1, 1968.

Supplementary Provisions [Cabinet Order No. 131 of May 27, 1968]

This Cabinet Order comes into effect on the date of promulgation; provided, however, that the provisions amending rows 11, 79, 109, and 176 of Appended Table 1 and the provisions adding one row after row 201-2 of that table come into effect on June 1, 1968.

Supplementary Provisions [Cabinet Order No. 158 of June 13, 1968] [Extract]

(1)This Cabinet Order comes into effect on June 15, 1968.

Supplementary Provisions [Cabinet Order No. 261 of October 11, 1969]

This Cabinet Order comes into effect on November 1, 1969; provided, however, that the provisions amending rows 1, 27, 63, 117, 158, 160, and 170 of Appended Table 1, the provisions amending row 1 of Appended Table 3, and the part of the provisions amending row 5 of that table that deletes the terms ", 63" and ", 160" come into effect on the date of promulgation.

Supplementary Provisions [Cabinet Order No. 266 of October 28, 1969]

This Cabinet Order comes into effect on November 1, 1969.

Supplementary Provisions [Cabinet Order No. 1 of January 22, 1970]

This Cabinet Order comes into effect on January 27, 1970.

Supplementary Provisions [Cabinet Order No. 327 of October 12, 1971]

This Cabinet Order comes into effect on October 15, 1971.

Supplementary Provisions [Cabinet Order No. 84 of April 25, 1972]

This Cabinet Order comes into effect on the date of promulgation.

Supplementary Provisions [Cabinet Order No. 111 of April 28, 1972]

This Cabinet Order comes into effect on the day on which the Agreement between Japan and the United States of America Concerning the Ryukyu Islands and the Daito Islands comes into effect (May 15, 1972).

Supplementary Provisions [Cabinet Order No. 373 of October 4, 1972]

This Cabinet Order comes into effect on the date of promulgation.

Supplementary Provisions [Cabinet Order No. 389 of October 30, 1972]

This Cabinet Order comes into effect on November 2, 1972.

Supplementary Provisions [Cabinet Order No. 403 of November 22, 1972]

This Cabinet Order comes into effect on November 27, 1972.

Supplementary Provisions [Cabinet Order No. 405 of November 24, 1972] [Extract]

(Effective Date)

(1)This Cabinet Order comes into effect on the effective date of the Act on the Regulation of Transfer of Specified Bird Species (November 30, 1972).

Supplementary Provisions [Cabinet Order No. 414 of December 7, 1972]

This Cabinet Order comes into effect on January 1, 1973.

Supplementary Provisions [Cabinet Order No. 427 of December 15, 1972]

This Cabinet Order comes into effect on January 1, 1973; provided, however, that the provisions amending rows 29, 42, 49, 50, 54-3, 56, 58, 60, 65, 74, 75, 105, 148-2, 152, 159, and 196 of Appended Table 1, the provisions amending items (i) and (iii) of the Notes of that table, and the provisions amending row 5 of Appended Table 3 come into effect on the date of promulgation.

Supplementary Provisions [Cabinet Order No. 13 of January 25, 1973] [Extract]

(1)This Cabinet Order comes into effect on February 1, 1973.

Supplementary Provisions [Cabinet Order No. 115 of April 27, 1973] [Extract]

(1)This Cabinet Order comes into effect on May 8, 1973.

Supplementary Provisions [Cabinet Order No. 244 of August 27, 1973] [Extract]

(1)This Cabinet Order comes into effect on September 1, 1973.

Supplementary Provisions [Cabinet Order No. 291 of October 1, 1973]

This Cabinet Order comes into effect on the date of promulgation.

Supplementary Provisions [Cabinet Order No. 342 of November 22, 1973]

This Cabinet Order comes into effect on November 24, 1973.

Supplementary Provisions [Cabinet Order No. 21 of February 1, 1974] [Extract]

(1)This Cabinet Order comes into effect on February 4, 1974.

Supplementary Provisions [Cabinet Order No. 343 of November 28, 1975]

This Cabinet Order comes into effect on December 15, 1975; provided, however, that the provisions amending rows 8, 29, 37, 48, 98, 99, and 108, and items (i), (iii), and (iv) of the Notes of Appended Table 1 come into effect on the date of promulgation.

Supplementary Provisions [Cabinet Order No. 68 of April 15, 1976]

This Cabinet Order comes into effect on the date of promulgation; provided, however, that the provisions amending row 192 of Appended Table 1 come into effect on April 20, 1976.

Supplementary Provisions [Cabinet Order No. 3 of January 14, 1977]

This Cabinet Order comes into effect on February 4, 1977; provided, however, that the provisions amending rows 2 through 3, 5-2, 6, 20, 29, 35, 36, 37 through 39, 41, 52, 53, 58-2, 104, 156, 174-3, 175, 179, 180, 182, 183, 186, 188, 191 and 192, and the Notes of Appended Table 1, the provisions amending Appended Table 1-2, and the provisions amending Appended Table 3 come into effect on the date of promulgation.

Supplementary Provisions [Cabinet Order No. 197 of June 8, 1977]

This Cabinet Order comes into effect on the date of promulgation.

Supplementary Provisions [Cabinet Order No. 289 of September 30, 1977] [Extract]

(1)This Cabinet Order comes into effect on October 1, 1977.

Supplementary Provisions [Cabinet Order No. 282 of July 5, 1978] [Extract]

(Effective Date)

Article 1This Cabinet Order comes into effect on the date of promulgation.

Supplementary Provisions [Cabinet Order No. 331 of September 22, 1978]

(1)This Cabinet Order comes into effect on October 2, 1978.

(2)Prior laws continue to govern the export or import of goods, as permitted, by a person that has obtained, before this Cabinet Order comes into effect, permission stated in Article 2, paragraph (1) of the Cabinet Order on Export Trade Control prior to the amendment with respect to the conclusion of a consignment sales trade contract.

Supplementary Provisions [Cabinet Order No. 138 of May 26, 1980] [Extract]

(1)This Cabinet Order comes into effect on June 2, 1980.

(2)Prior laws continue to govern the export of goods conducted, as approved or permitted, by a person that has obtained, before this Cabinet Order comes into effect, approval or permission under Article 1, paragraph (1) or Article 2, paragraph (1) of the Cabinet Order on Export Trade Control for the export of goods to Iran.

(4)Prior laws continue to govern a target service contract concluded or target services provided by a person that has obtained, before this Cabinet Order comes into effect, permission under Article 17, paragraph (2) of the Foreign Exchange Control Order or approval, permission, or certification under the Cabinet Order on Export Trade Control or the Cabinet Order on Import Trade Control for concluding a target service contract or providing target services with respect to a specified business, as permitted pursuant to that paragraph or as approved, permitted, or certified pursuant the Cabinet Order on Export Trade Control or the Cabinet Order on Import Trade Control.

Supplementary Provisions [Cabinet Order No. 264 of October 11, 1980] [Extract]

(Effective Date)

Article 1This Cabinet Order comes into effect on the effective date of the Act Partially Amending the Foreign Exchange and Foreign Trade Control Act (December 1, 1980).

(Transitional Measures)

Article 2(1)Prior laws continue to govern the export of goods conducted, as permitted, by a person that has obtained, before this Cabinet Order comes into effect, permission under Article 1, paragraph (1) of the Cabinet Order on Export Trade Control prior to the amendment, to which the provisions of Article 1, paragraph (1) of that Cabinet Order after the amendment apply.

(2)Prior laws continue to govern the export or import of goods conducted, as approved, by a person that has obtained, before this Cabinet Order comes into effect, approval under Article 2, paragraph (1) of the Cabinet Order on Export Trade Control prior to the amendment, for the conclusion of a contract for trade under a processing deal, to which the provisions of Article 1, paragraph (1) of that Order after the amendment or Article 4, paragraph (1) of the Cabinet Order on Import Trade Control apply.

(Transitional Measures for Penal Provisions)

Article 3Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 285 of October 31, 1980]

This Cabinet Order comes into effect on the day on which the Convention on International Trade in Endangered Species of Wild Fauna and Flora comes into effect in Japan (November 4, 1980).

Supplementary Provisions [Cabinet Order No. 7 of January 26, 1981]

(1)This Cabinet Order comes into effect on the date of promulgation.

(2)Prior laws continue to govern the export of goods conducted, as permitted, by a person that has obtained, before this Cabinet Order comes into effect, permission under Article 1, paragraph (1) of the Cabinet Order on Export Trade Control for the export of goods to Iran.

(3)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 278 of September 14, 1981]

(1)This Cabinet Order comes into effect on October 12, 1981; provided, however, that the provisions deleting row 1 of Appended Table 1 and changing row 2 of that table to row 1 of that table, the provisions deleting row 44 of that table and changing row 43-2 of that table to row 44 of that table, the provisions deleting row 58-2 of that table, the provisions amending rows 59, 68 through 70, 77, 84, 92, 103 and 124 of that table, the provisions deleting row 148-2 of that table, the provisions amending row 166 of that table, the provisions amending item (i) of the Notes of that table (excluding the provisions adding ", Cuba" after "Canada" and the provisions adding ", Ethiopia" after "Egypt"), the provisions deleting row 1 of Appended Table 3, and the provisions amending row 1 of Appended Table 5 come into effect on the date of promulgation.

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 39 of March 21, 1984]

(1)This Cabinet Order comes into effect on April 10, 1984; provided, however, that the provisions amending row 32 of Appended Table 1 come into effect on the date of promulgation.

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 248 of July 27, 1984]

This Cabinet Order comes into effect on August 3, 1984.

Supplementary Provisions [Cabinet Order No. 7 of January 25, 1985]

(1)This Cabinet Order comes into effect on February 15, 1985; provided, however, that the provisions adding one paragraph to Article 4, the provisions amending the middle column of row 165 of Appended Table 1, the provisions amending row 166 of that table, the provisions amending item (ii) of Appended Table 2, the provisions amending Appended Table 5, and the provisions of the following paragraph and paragraph (3) of the Supplementary Provisions come into effect on the date of promulgation.

(2)Up until February 14, 1985, the term "all regions" in the provisions of row 166 of Appended Table 1 after the amendment is to be replaced with "region A".

(3)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 315 of September 30, 1986]

This Cabinet Order comes into effect on October 6, 1986.

Supplementary Provisions [Cabinet Order No. 378 of December 19, 1986]

(1)This Cabinet Order comes into effect on January 1, 1987; provided, however, that the provisions amending rows 18, 21, 44, 48, 75, 120, 146-2, 151, 155 and 159 of Appended Table 1 come into effect on the date of promulgation.

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 382 of December 23, 1986]

This Cabinet Order comes into effect on January 1, 1987.

Supplementary Provisions [Cabinet Order No. 373 of November 5, 1987] [Extract]

(Effective Date)

Article 1This Cabinet Order comes into effect on the effective date of the Act Partially Amending the Foreign Exchange and Foreign Trade Control Act (November 10, 1987).

(Transitional Measures)

Article 3With regard to the export of goods deemed to have been permitted under Article 48, paragraph (1) of the new Act or Article 1, paragraph (2) of the Cabinet Order on Export Trade Control amended by this Cabinet Order (referred to as the "new Order" below) or have been approved under Article 2, paragraph (1) of the new Order, pursuant to the provisions of Article 3 of the Supplementary Provisions of the amendment Act, conditions attached to approval under Article 1, paragraph (1) of the Cabinet Order on Export Trade Control prior to the amendment by this Cabinet Order (referred to as the "former Order" below) pursuant to the provisions of paragraph (6) of that Article is deemed to be conditions attached to permission under Article 48, paragraph (1) of the new Act or Article 1, paragraph (2) of the new Order or conditions attached to approval under Article 2, paragraph (1) of the new Order, pursuant to the provisions of Article 1, paragraph (4) or Article 2, paragraph (6) of the new Order, respectively.

Article 4The valid period of the permission or approval for the export of goods prescribed in the preceding Article is to be three months from the day on which approval under Article 1, paragraph (1) of the former Order was granted (or if any valid period different from the period referred to in Article 8, paragraph (1) of the former Order was determined pursuant to the provisions of paragraph (2) of that Article, or if that valid period was extended, the relevant period).

Article 5Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 331 of November 26, 1988]

(1)This Cabinet Order comes into effect on December 20, 1988; provided, however, that the part of the provisions of Article 2 that amends rows 5, 16, 19, 25, 46, 69, rows 93, 130, 131, and 155 of Appended Table 1 of the Cabinet Order on Export Trade Control comes into effect on the date of promulgation.

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 25 of February 7, 1989]

This Cabinet Order comes into effect on February 16, 1989.

Supplementary Provisions [Cabinet Order No. 104 of April 7, 1989]

(1)This Cabinet Order comes into effect on the date of promulgation; provided, however, that the provisions amending rows 28 and 30 of Appended Table 1 come into effect on April 16, 1989.

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 202 of June 30, 1989]

(1)This Cabinet Order comes into effect on July 9, 1989; provided, however, that the provisions amending Appended Table 3 come into effect on the date of promulgation.

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before the provisions amending Appended Table 3 come into effect.

Supplementary Provisions [Cabinet Order No. 290 of September 29, 1989]

(1)This Cabinet Order comes into effect on the date of promulgation; provided, however, that the amended provisions stated in the following items come into effect on the date stated in the corresponding item:

(i)the part of the provisions of Article 1 that amends rows 1-2, 5-3, 8-2, 8-3, 9-2, 12-2, 12-3, 18-2, and 25 of the Appended Table of the Foreign Exchange Control and the part of the provisions of Article 2 that amends rows 17, 26, 80, 90, 98, 102, 103, 105, 110, 121, 126, 136, 137, and 151 of Appended Table 1 of the Cabinet Order on Export Trade Control: October 16, 1989; and

(ii)the part of the provisions of Article 1 that amends rows 1-3, 5-2, 7-2, 10, and 26 of the Appended Table of the Foreign Exchange Control Order and the part of the provisions of Article 2 that amends rows 21, 22, 55, 74, 77-2, 93, 111, 112, 120, 147, 148, 153, 154, 159, 183, and 184 of Appended Table 1 of the Cabinet Order on Export Trade Control: October 26, 1989.

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 350 of December 27, 1989]

(1)This Cabinet Order comes into effect on January 20, 1990; provided, however, that the part of the provisions of Article 1 that amends row 12 of the Appended Table of the Foreign Exchange Control Order and the part of the provisions of Article 2 that amends rows 26, 32, 34, 43, 100, 117, and 124 of Appended Table 1 of the Cabinet Order on Export Trade Control come into effect on the date of promulgation.

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect (in the cases of the amended provisions prescribed in the proviso to the preceding paragraph, the relevant amended provisions).

Supplementary Provisions [Cabinet Order No. 246 of August 15, 1990] [Extract]

(1)This Cabinet Order comes into effect on August 22, 1990.

Supplementary Provisions [Cabinet Order No. 297 of October 2, 1990]

(1)This Cabinet Order comes into effect on the date of promulgation; provided, however, that the part of the provisions amending Article 2, paragraph (1), item (i)-2 that changes the term "21" to "21-2", the provisions amending Article 2, paragraph (5), the provisions amending Article 4, paragraph (2), the provisions adding row 21-2 to Appended Table 2, the provisions amending row 39 of that table and the provisions adding row 6 to Appended Table 7 come into effect on October 12, 1990.

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 308 of October 17, 1990]

(1)This Cabinet Order comes into effect on November 1, 1990; provided, however, that the part of the provisions of Article 1 that amends rows 1, 1-2, 10-2, 11-2, 13, 17, and 19 of the Appended Table of the Foreign Exchange Control Order, and the part of the provisions of Article 2 that amends rows 2, 9, 15, 29 through 30, 46, 53, 58, 71, 75 through 77, 89, 92, 93, 106, 108, 109, 118, 121, 122, 125 through 127, 129 through 131, 140, 142, 144, 145, 149, 153, 155, and 165 through 167 of Appended Table 1 of the Cabinet Order on Export Trade Control comes into effect on the date of promulgation.

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect (in the cases of the amended provisions prescribed in the preceding paragraph, the relevant amended provisions).

Supplementary Provisions [Cabinet Order No. 37 of March 18, 1991]

(1)This Cabinet Order comes into effect on the date of promulgation.

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 276 of September 3, 1991]

This Cabinet Order comes into effect on September 15, 1991.

Supplementary Provisions [Cabinet Order No. 290 of September 19, 1991]

This Cabinet Order comes into effect on the date of promulgation.

Supplementary Provisions [Cabinet Order No. 323 of October 14, 1991]

(1)This Cabinet Order comes into effect on November 14, 1991.

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 11 of January 29, 1992]

This Cabinet Order comes into effect on the date of promulgation.

Supplementary Provisions [Cabinet Order No. 150 of April 15, 1992] [Extract]

(1)This Cabinet Order comes into effect on April 22, 1992.

Supplementary Provisions [Cabinet Order No. 209 of June 19, 1992] [Extract]

(i)the part of the provisions of Article 1 that amends Article 18 of the Foreign Exchange Control Order and the part of the provisions of Article 2 that amends Article 4, paragraph (2) of the Cabinet Order on Export Trade Control and Appended Table 2-2: June 26, 1992;

(ii)the part of the provisions of Article 2 that amends Article 2, paragraph (1), item (i)-2 of the Cabinet Order on Export Trade Control, Appended Table 2, and Appended Table 7: July 1, 1992.

(4)Prior laws continue to govern the export of goods conducted, as permitted, by a person that has obtained, before this Cabinet Order comes into effect, permission under Article 1, paragraph (1) of the Cabinet Order on Export Trade Control prior to the amendment for the export of goods to Hungary.

(5)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 371 of December 9, 1992]

(1)This Cabinet Order comes into effect on December 31, 1992.

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 395 of December 28, 1992]

This Cabinet Order comes into effect on January 20, 1993.

Supplementary Provisions [Cabinet Order No. 66 of March 26, 1993]

(1)This Cabinet Order comes into effect on April 1, 1993.

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 157 of April 27, 1993]

This Cabinet Order comes into effect on May 1, 1993.

Supplementary Provisions [Cabinet Order No. 202 of June 18, 1993]

This Cabinet Order comes into effect on July 16, 1993.

Supplementary Provisions [Cabinet Order No. 269 of July 30, 1993]

(1)This Cabinet Order comes into effect on the date of promulgation; provided, however, that the provisions amending row 35 of Appended Table 2 come into effect on August 10, 1993.

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 379 of December 1, 1993] [Extract]

(Effective Date)

(1)This Cabinet Order comes into effect on December 22, 1993; provided, however, that the amended provisions stated in the following items come into effect on the date stated in the corresponding item:

(i)the provisions amending row 9, (iv) of Appended Table 1: the date of promulgation;

(ii)the provisions amending Article 2, paragraph (5), the provisions amending Article 4, paragraph (2), and the part of the provisions adding row 35-2 to Appended Table 2 that relates to (ii) of the same row (excluding the part that excludes those stated in (i)): the effective date of the Act Partially Amending the Act on Waste Management and Public Cleansing (Act No. 105 of 1992);

(iii)the part of the provisions adding row 35-2 to Appended Table 2 that relates to (i) of the same row and the part that excludes those stated in (i) from the part that relates to (ii) of the same row: the day on which the Basel Convention on the Control of Transboundary Movements of Hazardous Wastes and Their Disposal comes to effect in Japan (December 16, 1993).

(Transitional Measures for Penal Provisions)

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 382 of December 2, 1993] [Extract]

(1)This Cabinet Order comes into effect on December 6, 1993.

Supplementary Provisions [Cabinet Order No. 17 of January 28, 1994]

(1)This Cabinet Order comes into effect on the date of promulgation.

(2)Prior laws continue to govern a transaction conducted for the purpose of providing specified technology, as permitted, by a person that has obtained, before this Cabinet Order comes into effect, permission under Article 17-2, paragraph (1) of the Foreign Exchange Control Order prior to the amendment with respect to transactions for the purpose of providing specified technology in the Czech Republic or Slovakia.

(4)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 113 of March 31, 1994] [Extract]

(Effective Date)

(1)This Cabinet Order comes into effect on April 1, 1994.

Supplementary Provisions [Cabinet Order No. 143 of May 24, 1994]

This Cabinet Order comes into effect on May 27, 1994.

Supplementary Provisions [Cabinet Order No. 153 of June 24, 1994] [Extract]

(Effective Date)

(1)This Cabinet Order comes into effect on July 6, 1994; provided, however, that the part of the provisions of Article 1 that amends row 8 of the Appended Table of the Foreign Exchange Control (limited to the part of the provisions of (ii) of the same row that changes the phrase "goods listed in row 8, (i) of Appended Table 1 of the Cabinet Order on Export Trade Control" to "computers or their auxiliaries or components"), and the part of the provisions of Article 2 that amends row 8 of Appended Table 1 of the Cabinet Order on Export Trade Control come into effect on the date of promulgation.

(Transitional Measures)

(3)Prior laws continue to govern the export of goods conducted, as permitted, by a person that has obtained, before this Cabinet Order comes into effect, permission under Article 1, paragraph (1) or (2) of the Cabinet Order on Export Trade Control prior to the amendment for the export of goods listed in the middle column of rows 5 through 14 of Appended Table 1 of that Cabinet Order, to which the provisions of Article 1, paragraph (2) and Article 2, paragraph (1), item (i) of that Cabinet Order after the amendment apply.

(4)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 335 of October 26, 1994]

(1)This Cabinet Order comes into effect on the date of promulgation.

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 421 of December 28, 1994]

(1)This Cabinet Order comes into effect on January 1, 1995; provided, however, that the part of the provisions of Article 1 that amends Article 2, paragraph (1), item (iii) and the proviso to Article 4, paragraph (2) of the Cabinet Order on Export Trade Control, and the provisions adding row 45 to Appended Table 2 of that Cabinet Order come into effect on the effective date of the Act Partially Amending the Customs Tariff Act (Act No. 118 of 1994).

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 9 of January 25, 1995] [Extract]

(Effective Date)

Article 1This Cabinet Order comes into effect on April 1, 1995.

Supplementary Provisions [Cabinet Order No. 165 of March 31, 1995]

(1)Each provision of this Cabinet Order stated in each of the following items comes into effect on the date specified in the corresponding item:

(i)the provisions amending row 27 of Appended Table 2: April 1, 1995;

(ii)the provisions amending row 21-2 of Appended Table 2: April 4, 1995;

(iii)the provisions amending Article 2, paragraph (1), item (iii), row 24 of Appended Table 2, and row 4 of Appended Table 7: May 1, 1995;

(iv)the provisions amending row 35 of Appended Table 2: June 14, 1995.

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before the provisions stated in item (i) or (iii) of the preceding paragraph come into effect.

Supplementary Provisions [Cabinet Order No. 240 of June 14, 1995] [Extract]

(Effective Date)

Article 1This Cabinet Order comes into effect on the effective date of the Act Partially Amending the Act on Conservation of Endangered Species of Wild Fauna and Flora (June 28, 1995).

Supplementary Provisions [Cabinet Order No. 31 of August 9, 1995]

(1)This Cabinet Order comes into effect on August 23, 1995.

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 420 of December 20, 1995] [Extract]

(Effective Date)

(1)This Cabinet Order comes into effect on October 1, 1996; provided, however, that the provision stated in each of the following items comes into effect on the date specified in the corresponding item:

(ii)the part of the provisions of Article 2 that amends row 2 of Appended Table 1 of the Cabinet Order on Export Trade Control which is the part related to (xv) of the same row, and the provisions amending rows 3-2 and 6 of that table: January 3, 1996.

(Transitional Measures)

(2)Prior laws continue to govern a service transaction conducted, as permitted, by a person that has obtained, before this Cabinet Order comes into effect, permission under Article 17-2, paragraph (1) of the Foreign Exchange Control Order prior to the amendment with respect to transactions for the purpose of providing the technologies stated in row 2, (ii) of the Appended Table of that Order, to which the provisions of Article 17-2, paragraph (3) of the Foreign Exchange Control Order after the amendment apply.

(3)Prior laws continue to govern the export of goods conducted, as permitted, by a person that has obtained, before this Cabinet Order comes into effect, permission under Article 1, paragraph (1) of the Cabinet Order on Export Trade Control prior to the amendment with respect to the export of goods listed in row 2, (xii) of Appended Table 1 of that Cabinet Order, to which the provisions of Article 1, paragraph (2) or Article 2, paragraph (1), item (i) of the Cabinet Order on Export Trade Control after the amendment apply.

(4)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 250 of August 23, 1996] [Extract]

(Effective Date)

Article 1This Cabinet Order comes into effect on September 13, 1996.

(Transitional Measures)

Article 2Prior laws continue to govern a service transaction conducted, as permitted, by a person that has obtained, before this Cabinet Order comes into effect, permission under Article 17-2, paragraph (3) of the Foreign Exchange Control Order prior to the amendment with respect to transactions for the purpose of providing the technologies stated in the middle column of rows 5 through 15 of the Appended Table of that Order, to which the provisions of Article 17-2, paragraph (1) of the Foreign Exchange Control Order after the amendment apply.

Article 3Prior laws continue to govern the export of goods conducted, as permitted or approved, by a person that has obtained, before this Cabinet Order comes into effect, permission under Article 1, paragraph (2) of the Cabinet Order on Export Trade Control prior to the amendment or approval under Article 2, paragraph (1), item (i) of that Cabinet Order for the export of goods listed in the middle column of rows 5 through 15 of Appended Table 1 of that Cabinet Order, to which the provisions of Article 1, paragraph (1) of the Cabinet Order on Export Trade Control after the amendment apply.

Article 4An application for permission under Article 17-2, paragraph (3) of the Foreign Exchange Control Order prior to the amendment, with respect to transactions conducted for the purpose of providing the technologies stated in the middle column of rows 5 through 15 of the Appended Table of that Order, which has already been made at the time this Cabinet Order comes into effect and which relates to transactions that require permission under Article 17-2, paragraph (1) of the Foreign Exchange Control Order after the amendment, is to be deemed to be an application for permission under that paragraph.

Article 5An application for permission under Article 1, paragraph (2) of the Cabinet Order on Export Trade Control prior to the amendment or approval under Article 2, paragraph (1), item (i) of that Cabinet Order, with respect to the export of goods listed in the middle column of rows 5 through 15 of Appended Table 1 of that Order, which has already been made at the time this Cabinet Order comes into effect and which relates to the export of goods that requires permission under Article 1, paragraph (1) of the Cabinet Order on Export Trade Control after the amendment, is deemed to be an application for permission under that paragraph.

(Transitional Measures for Penal Provisions)

Article 6Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 315 of November 1, 1996]

(Effective Date)

(1)This Cabinet Order comes into effect on the date of promulgation.

(Transitional Measures for Penal Provisions)

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 94 of March 28, 1997]

This Cabinet Order comes into effect on the day on which the Convention on the Prohibition of the Development, Production, Stockpiling and Use of Chemical Weapons and on Their Destruction becomes effective in Japan (April 29, 1997).

Supplementary Provisions [Cabinet Order No. 223 of June 27, 1997]

(Effective Date)

(1)This Cabinet Order comes into effect on July 1, 1997.

(Transitional Measures for Penal Provisions)

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 327 of November 12, 1997] [Extract]

(Effective Date)

(1)This Cabinet Order comes into effect on November 16, 1997.

Supplementary Provisions [Cabinet Order No. 353 of December 10, 1997] [Extract]

(Effective Date)

Article 1This Cabinet Order comes into effect on the effective date of the provisions stated in Article 1, item (i) of the Supplementary Provisions of the Act Partially Amending the Act on Waste Management and Public Cleansing (hereinafter referred to as the "amendment Act" in this Article) (June 17, 1998); provided, however, that the provision stated in each of the following items comes into effect on the date specified in the corresponding item:

(i)the part of the provisions of Article 1 that amends the table of contents of the Order for Enforcement of the Act on Waste Management and Public Cleansing, the provisions adding five Articles after Article 5 of Chapter II of that Order (excluding the part related to Article 5-2 and 5-3 of that Order), the provisions amending Article 6-8 of that Order (limited to the part changing the term "the proviso to Article 14, paragraph (9)" to "the proviso to Article 14, paragraph (10)"), the provisions amending Article 6-11 of that Order (limited to the part changing the term "the proviso to Article 14-4, paragraph (9)" to "the proviso to Article 14-4, paragraph (10)"), the provisions amending Article 7-2 of that Order, the provisions changing Article 7-2 of Chapter III of that Order to Article 7-4 of that Order, the provisions adding two Articles after Article 7 of that Order (excluding the part related to Article 7-2 of that Order), the provisions deleting Article 22 of that Order and changing Article 21-2 of that Order to Article 22, the provisions of Article 4, the provisions of Article 6, and the provisions of Article 7: the effective date of the amendment Act (December 17, 1997).

Article 6Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 387 of December 25, 1997]

(Effective Date)

Article 1This Cabinet Order comes into effect on April 1, 1998.

(Transitional Measures upon Partial Amendment of the Cabinet Order on Import Trade Control)

Article 2Prior laws continue to govern the import of goods conducted, as approved, by a person that has obtained, before this Cabinet Order comes into effect, approval for import by a certified foreign exchange bank under Article 4, paragraph (2) of the Cabinet Order on Import Trade Control prior to the amendment under Article 2, to which the provisions of Article 4, paragraph (1) of that Order after the amendment apply.

(Transitional Measures for Penal Provisions)

Article 3Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 63 of March 25, 1998]

(Effective Date)

Article 1This Cabinet Order comes into effect on April 1, 1998.

(Transitional Measures Concerning Valid Periods of Permission and Approval)

Article 2Notwithstanding to the provisions of Article 8, paragraph (1) of the Cabinet Order on Export Trade Control after the amendment, prior laws continue to govern the valid period of permission under Article 48, paragraph (1) of the Foreign Exchange and Foreign Trade Control Act (Act No. 228 of 1949) or approval under Article 2, paragraph (1) of the Cabinet Order on Export Trade Control prior to the amendment that has already been obtained at the time this Cabinet Order comes into effect.

(Transitional Measures for Penal Provisions)

Article 3Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 287 of August 26, 1998]

(Effective Date)

(1)This Cabinet Order comes into effect on the date of promulgation; provided, however, that the provisions amending Appended Table 2 come into effect on August 29, 1998.

(Transitional Measures for Penal Provisions)

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 359 of November 5, 1998]

This Cabinet Order comes into effect on November 12, 1998.

Supplementary Provisions [Cabinet Order No. 130 of March 31, 1999]

(Effective Date)

(1)This Cabinet Order comes into effect on April 1, 1999.

(Transitional Measures for Penal Provisions)

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 190 of June 18, 1999] [Extract]

(Effective Date)

(1)This Cabinet Order comes into effect on the date of promulgation; provided, however, that the provision stated in each of the following items comes into effect on the date specified in the corresponding item:

(ii)the part of the provisions of Article 2 that amends row 16 of Appended Table 1 of the Cabinet Order on Export Trade Control: July 18, 1999.

(Transitional Measures for Penal Provisions)

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 424 of December 27, 1999]

This Cabinet Order comes into effect on March 1, 2000.

Supplementary Provisions [Cabinet Order No. 75 of March 17, 2000]

This Cabinet Order comes into effect on April 3, 2000.

Supplementary Provisions [Cabinet Order No. 224 of May 17, 2000]

(Effective Date)

(1)This Cabinet Order comes into effect on the date of promulgation.

(Transitional Measures for Penal Provisions)

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 243 of June 2, 2000] [Extract]

(Effective Date)

(1)This Cabinet Order comes into effect on October 1, 2000.

(Transitional Measures)

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 311 of June 7, 2000] [Extract]

(Effective Date)

Article 1This Cabinet Order comes into effect on the effective date of the Act Partially Amending the Cabinet Act (Act No. 88 of 1999) (January 6, 2001).

Supplementary Provisions [Cabinet Order No. 347 of June 23, 2000]

(Effective Date)

(1)This Cabinet Order comes into effect on July 7, 2000.

(Transitional Measures for Penal Provisions)

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 391 of July 24, 2000] [Extract]

(Effective Date)

Article 1This Cabinet Order comes into effect on April 1, 2001.

Supplementary Provisions [Cabinet Order No. 545 of December 27, 2000]

(Effective Date)

(1)This Cabinet Order comes into effect on the date of promulgation.

(Transitional Measures for Penal Provisions)

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 184 of May 16, 2001]

(Effective Date)

(1)This Cabinet Order comes into effect on the date of promulgation; provided, however, that the provisions amending row 10 of Appended Table 1 come into effect on May 30, 2001.

(Transitional Measures for Penal Provisions)

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 335 of October 26, 2001]

(Effective Date)

(1)This Cabinet Order comes into effect on January 1, 2002; provided, however, that the provisions amending row 21-2 of Appended Table 2 come into effect on November 1, 2001.

(Transitional Measures for Penal Provisions)

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 439 of December 28, 2001]

(Effective Date)

(1)This Cabinet Order comes into effect on April 1, 2002.

(Transitional Measures for Penal Provisions)

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 209 of June 14, 2002]

(Effective Date)

(1)This Cabinet Order comes into effect on July 15, 2002.

(Transitional Measures for Penal Provisions)

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 288 of September 4, 2002]

Each provision of this Cabinet Order stated in each of the following items comes into effect on the date specified in the corresponding item:

(i)the part of the provisions of Article 1 that amends Article 11, item (i) of the Cabinet Order on Export Trade Control, and rows 36, 37, and 43 of Appended Table 2, and the provisions of Article 2: the day on which the Convention on the Means of Prohibiting and Preventing the Illicit Import, Export and Transfer of Ownership of Cultural Property comes into effect in Japan;

(ii)the part of the provisions of Article 1 that amends row 1, (i) of Appended Table 1 of the Cabinet Order on Export Trade Control: September 30, 2002;

(iii)the part of the provisions of Article 1 that amends row 35 of Appended Table 2 of the Cabinet Order on Export Trade Control (excluding the part adding the term "and group III" below "group II"): the day on which the amendment to the Montreal Protocol on Substances that Deplete the Ozone Layer, adopted on September 17, 1997 (the amendment adopted at the Ninth Meeting of the Parties), comes into effect in Japan;

(iv)the part of the provisions of Article 1 that amends row 35 of Appended Table 2 of the Cabinet Order on Export Trade Control (limited to the part adding the term "and group III" below "group II"): February 24, 2003.

Supplementary Provisions [Cabinet Order No. 405 of December 27, 2002]

(Effective Date)

(1)This Cabinet Order comes into effect on January 10, 2003; provided, however, that the provisions deleting Article 4, paragraph (2), item (ii), (c), the provisions changing (d) of that item to (c) of that item, the provisions deleting rows 25-2 and 25-3 of Appended Table 2, and the provisions of the following paragraph come into effect on the date of promulgation.

(Transitional Measures for Penal Provisions)

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before the amended provisions prescribed in the proviso to the preceding paragraph come into effect.

Supplementary Provisions [Cabinet Order No. 28 of January 31, 2003] [Extract]

(Effective Date)

Article 1This Cabinet Order comes into effect on the effective date of the Act on the Use of Information and Communication Technology in Administrative Procedures (February 3, 2003).

Supplementary Provisions [Cabinet Order No. 125 of March 31, 2003]

This Cabinet Order comes into effect on April 1, 2003.

Supplementary Provisions [Cabinet Order No. 198 of April 4, 2003]

This Cabinet Order comes into effect on April 14, 2003.

Supplementary Provisions [Cabinet Order No. 213 of April 23, 2003] [Extract]

(1)This Cabinet Order comes into effect on the effective date of the provisions stated in Article 1, item (i) of the Supplementary Provisions of the Act Partially Amending the Pharmaceutical Affairs Act and the Blood Donation Brokerage Control Act (July 30, 2003).

Supplementary Provisions [Cabinet Order No. 248 of June 6, 2003] [Extract]

(Effective Date)

Article 1This Cabinet Order comes into effect on the date of promulgation.

(Transitional Measures for Penal Provisions)

Article 2Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 382 of August 29, 2003]

This Cabinet Order comes into effect on the day on which the Convention on the Safety of the Management of Spent Fuels and Radioactive Wastes comes into effect in Japan.

Supplementary Provisions [Cabinet Order No. 449 of October 1, 2003] [Extract]

(Effective Date)

Article 1This Cabinet Order comes into effect on December 1, 2003.

Supplementary Provisions [Cabinet Order No. 457 of October 16, 2003] [Extract]

(Effective Date)

Article 1This Cabinet Order comes into effect on October 1, 2004.

Supplementary Provisions [Cabinet Order No. 518 of December 17, 2003]

(Effective Date)

(1)This Cabinet Order comes into effect on January 20, 2004.

(Transitional Measures for Penal Provisions)

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 531 of December 19, 2003] [Extract]

(Effective Date)

Article 1This Cabinet Order comes into effect on the day on which the Rotterdam Convention on the Prior Informed Consent Procedure for Certain Hazardous Chemicals and Pesticides in International Trade comes into effect in Japan; provided, however, that the provisions amending row 35 of Appended Table 2 come into effect on January 1, 2004.

Supplementary Provisions [Cabinet Order No. 535 of December 19, 2003] [Extract]

(Effective Date)

Article 1This Cabinet Order comes into effect on the effective date of the Act Partially Amending the Pharmaceutical Affairs Act and the Blood Donation Brokerage Control Act (April 1, 2005); provided, however, that the provisions of Article 5 come into effect either on the effective date of the Cabinet Order Partially Amending the Cabinet Order on Export Trade Control (Cabinet Order No. 531 of 2003) or on the effective date of this Cabinet Order, whichever comes later, and the provisions of Article 9 of the Supplementary Provisions come into effect on the date of promulgation.

Supplementary Provisions [Cabinet Order No. 107 of March 31, 2004] [Extract]

(Effective Date)

Article 1This Cabinet Order comes into effect on April 1, 2004.

Supplementary Provisions [Cabinet Order No. 174 of April 28, 2004] [Extract]

(Effective Date)

(1)This Cabinet Order comes into effect on May 17, 2004.

Supplementary Provisions [Cabinet Order No. 352 of November 10, 2004]

(Effective Date)

(1)This Cabinet Order comes into effect on January 1, 2005; provided, however, that the part of the provisions of Article 2 that amends Appended Table 2 of the Cabinet Order on Export Trade Control comes into effect on the date of promulgation.

(Transitional Measures for Penal Provisions)

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 105 of March 31, 2005] [Extract]

(Effective Date)

Article 1This Cabinet Order comes into effect on April 1, 2005.

Supplementary Provisions [Cabinet Order No. 247 of July 21, 2005] [Extract]

This Cabinet Order comes into effect on March 1, 2006.

Supplementary Provisions [Cabinet Order No. 358 of December 2, 2005]

(Effective Date)

(1)This Cabinet Order comes into effect on January 1, 2006.

(Transitional Measures for Penal Provisions)

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 200 of May 24, 2006] [Extract]

(Effective Date)

Article 1This Cabinet Order comes into effect on June 1, 2006.

Supplementary Provisions [Cabinet Order No. 250 of July 26, 2006] [Extract]

(Effective Date)

Article 1This Cabinet Order comes into effect on October 1, 2006; provided, however, that the part of the provisions of Article 1 that amends the table of contents of the Order for Enforcement of the Act on Waste Management and Public Cleansing, the provisions adding two Articles after Article 5-10 of Chapter II of that Order, the provisions amending Article 6-2, item (ii) and Article 7-6 of that Order, the provisions changing that Article of Chapter III of that Order to Article 7-8 of that Order, the provisions adding two Articles after Article 7-5 of that Order, and the provisions of Article 4 of the Supplementary Provisions come into effect on the effective date of the provisions stated in Article 1, item (ii) of the Supplementary Provisions of the Act Partially Amending the Air Pollution Control Act and Related Acts for Preventing Asbestos Health Damage (August 9, 2006).

(Transitional Measures for Penal Provisions)

Article 3Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 257 of August 2, 2006] [Extract]

(Effective Date)

Article 1This Cabinet Order comes into effect on September 1, 2006.

Supplementary Provisions [Cabinet Order No. 304 of September 21, 2006] [Extract]

(Effective Date)

Article 1This Cabinet Order comes into effect on January 1, 2007; provided, however, that the provisions of Article 2 comes into effect on the effective date of the Act on Advancement of Comprehensive Service Related to Education, Child Care, of Preschool Children (Act No. 77 of 2006), and the provisions of Article 4 comes into effect on October 1, 2006.

Supplementary Provisions [Cabinet Order No. 356 of November 14, 2006]

This Cabinet Order comes into effect on the day after the date of promulgation.

Supplementary Provisions [Cabinet Order No. 387 of December 20, 2006]

(Effective Date)

(1)This Cabinet Order comes into effect on June 1, 2007; provided, however, that the part of the provisions of Article 2 that amends Article 4, paragraph (1), item (iv) of the Cabinet Order on Export Trade Control (limited to the part deleting the phrase "or goods to be exported to the regions stated in Appended Table 4" and the part changing the phrase "export (goods)" to "export (goods) to regions other than those stated in Appended Table 4"), the provisions amending Appended Table 4 of that Order and the provisions amending Appended Table 7 of that Order come into effect on January 15, 2007.

(Transitional Measures for Penal Provisions)

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 71 of March 26, 2008]

(Effective Date)

(1)This Cabinet Order comes into effect on May 15, 2008.

(Transitional Measures for Penal Provisions)

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 260 of August 27, 2008]

This Cabinet Order comes into effect on November 1, 2008.

Supplementary Provisions [Cabinet Order No. 160 of June 16, 2009]

This Cabinet Order comes into effect on June 18, 2009.

Supplementary Provisions [Cabinet Order No. 182 of July 15, 2009]

This Cabinet Order comes into effect on October 1, 2009.

Supplementary Provisions [Cabinet Order No. 213 of August 14, 2009]

(Effective Date)

Article 1This Cabinet Order comes into effect on the effective date of the Act Partially Amending the Foreign Exchange and Foreign Trade Act (November 1, 2009); provided, however, that the provisions of Article 1 that amend Article 18-8, paragraph (1) of the Foreign Exchange Order and the provisions of Article 2 that amend Article 10 of the Cabinet Order on Export Trade Control (limited to the part pertaining Chapter VI-3) comes into effect on April 1, 2010.

(Transitional Measures for Penal Provisions)

Article 2Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 304 of December 28, 2009]

(Effective Date)

Article 1This Cabinet Order comes into effect on April 1, 2010.

(Transitional Measures for Penal Provisions)

Article 2Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 121 of April 9, 2010]

This Cabinet Order comes into effect on the date of promulgation.

Supplementary Provisions [Cabinet Order No. 154 of June 23, 2010]

This Cabinet Order comes into effect on September 1, 2010.

Supplementary Provisions [Cabinet Order No. 98 of April 8, 2011]

This Cabinet Order comes into effect on the date of promulgation.

Supplementary Provisions [Cabinet Order No. 141 of May 18, 2011]

(Effective Date)

Article 1This Cabinet Order comes into effect on July 1, 2011.

(Transitional Measures for Penal Provisions)

Article 2Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 416 of December 26, 2011]

(Effective Date)

Article 1This Cabinet Order comes into effect on April 1, 2012; provided, however, that the provisions amending Appended Table 3-2 comes into effect on February 1, 2012.

(Transitional Measures for Penal Provisions)

Article 2Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 116 of April 6, 2012]

This Cabinet Order comes into effect on the date of promulgation.

Supplementary Provisions [Cabinet Order No. 193 of July 19, 2012]

(Effective Date)

(1)This Cabinet Order comes into effect on August 1, 2012; provided, however, that the provisions amending Article 4, paragraph (2), item (iv) and the provisions of the following paragraph come into effect on the date of promulgation.

(Transitional Measures for Penal Provisions)

Supplementary Provisions [Cabinet Order No. 235 of September 14, 2012] [Extract]

(Effective Date)

Article 1This Cabinet Order comes into effect on the effective date of the Act for Establishment of the Nuclear Regulation Authority (September 19, 2012).

(Transitional Measures for Penal Provisions)

Article 3Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 120 of April 10, 2013]

This Cabinet Order comes into effect on the date of promulgation.

Supplementary Provisions [Cabinet Order No. 191 of June 26, 2013] [Extract]

(Effective Date)

(1)This Cabinet Order comes into effect on the effective date of the provisions stated in Article 1, item (iv) of the Supplementary Provisions of the Act for Establishment (July 8, 2013).

Supplementary Provisions [Cabinet Order No. 267 of September 13, 2013]

(Effective Date)

(1)This Cabinet Order comes into effect on October 15, 2013.

(Transitional Measures for Penal Provisions)

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 264 of July 25, 2014]

(Effective Date)

(1)This Cabinet Order comes into effect on the date of promulgation; provided, however, that the provisions amending Appended Table 1, and Appended Table 3-2 come into effect on September 15, 2014.

(Transitional Measures for Penal Provisions)

Supplementary Provisions [Cabinet Order No. 269 of July 30, 2014] [Extract]

(Effective Date)

Article 1This Cabinet Order comes into effect on the effective date of the amendment Act (November 25, 2014).

Supplementary Provisions [Cabinet Order No. 172 of April 3, 2015]

This Cabinet Order comes into effect on the date of promulgation.

Supplementary Provisions [Cabinet Order No. 284 of July 31, 2015]

(Effective Date)

(1)This Cabinet Order comes into effect on October 1, 2015; provided, however, that the provisions of Article 2 that amend Article 4, paragraph (2), item (ii), (a) and the proviso to item (iv) of the same paragraph of the Cabinet Order on Export Trade Control and the provisions adding as follows after row 35-3 of Appended Table 2 of the same Order comes into effect on the day on which the Minamata Convention on Mercury comes into effect in Japan.

(Transitional Measures for Penal Provisions)

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 189 of April 1, 2016]

This Cabinet Order comes into effect on the date of promulgation.

Supplementary Provisions [Cabinet Order No. 266 of July 29, 2016]

(Effective Date)

(1)This Cabinet Order comes into effect on the date of promulgation.

(Transitional Measures for Penal Provisions)

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 346 of November 7, 2016]

(Effective Date)

(1)This Cabinet Order comes into effect on January 7, 2017; provided, however, that the provisions listed as follows comes into effect on the date specified in the corresponding item:

(i)the provisions amending Article 2, paragraph (2), the provisions amending paragraph (3) of the Supplementary provisions, the provisions amending Appended Table 2, and the provisions amending Appended Table 7: December 7, 2016;

(ii)the provisions amending Appended Table 3-2: the date of promulgation.

(Transitional Measures for Penal Provisions)

Supplementary Provisions [Cabinet Order No. 25 of February 22, 2017]

This Cabinet Order comes into effect on the date of promulgation.

Supplementary Provisions [Cabinet Order No. 137 of April 12, 2017]

This Cabinet Order comes into effect on the date of promulgation.

Supplementary Provisions [Cabinet Order No. 195 of July 14, 2017]

This Cabinet Order comes into effect on the date of enforcement of the Act Partially Amending the Foreign Exchange and Foreign Trade Control Act (October 1, 2017).

Supplementary Provisions [Cabinet Order No. 284 of November 22, 2017]

(Effective Date)

(1)This Cabinet Order comes into effect on the day on which two months have elapsed from the date of promulgation; provided, however, that the provisions amending the proviso to Article 4, paragraph (2), item (i) and the provisions of the following paragraph comes into effect on the date of promulgation.

(Transitional Measures for Penal Provisions)

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect (or in cases of the amended provisions prescribed in the proviso to the preceding paragraph, before the relevant amended provisions come into effect).

Supplementary Provisions [Cabinet Order No. 19 of January 31, 2018] [Extract]

(Effective Date)

(1)This Cabinet Order comes into effect on the date of enforcement of the Act Partially Amending the Act on Conservation of Endangered Species of Wild Fauna and Flora (June 1, 2018).

Supplementary Provisions [Cabinet Order No. 312 of November 9, 2018]

(Effective Date)

(1)This Cabinet Order comes into effect on the day on which two months have elapsed from the date of promulgation; provided, however, that the provisions of Article 2 that amend Appended Table 2 of the Cabinet Order on Export Trade Control comes into effect on April 1, 2019.

(Transitional Measures for Penal Provisions)

Supplementary Provisions [Cabinet Order No. 319 of November 21, 2018] [Extract]

(Effective Date)

(1)This Cabinet Order comes into effect on the date of enforcement of the provisions of Article 5 of the amendment Act (September 1, 2019).

Supplementary Provisions [Cabinet Order No. 326 of November 30, 2018] [Extract]

(Effective Date)

(1)This Cabinet Order comes into effect on the date of enforcement of the Act Partially Amending the Agricultural Chemicals Regulation Act (December 1, 2018).

(Transitional Measures for Penal Provisions)

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 341 of December 19, 2018]

(Effective Date)

(1)This Cabinet Order comes into effect on the date of promulgation.

(Transitional Measures for Penal Provisions)

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 151 of April 10, 2019]

This Cabinet Order comes into effect on April 12, 2019.

Supplementary Provisions [Cabinet Order No. 71 of August 7, 2019]

This Cabinet Order comes into effect on the day on which 21 days have elapsed from the date of promulgation.

Supplementary Provisions [Cabinet Order No. 168 of November 22, 2019] [Extract]

(Effective Date)

(1)This Cabinet Order comes into effect on the day on which two months have elapsed from the date of promulgation; provided, however, that the provisions amending paragraph (3) of the Supplementary Provisions and the provisions of paragraph (3) of the Supplementary Provisions come into effect on the date of promulgation.

(Transitional Measures for Penal Provisions)

(2)Prior laws continue to govern the application of penal provisions to any acts undertaken before this Cabinet Order comes into effect.

Supplementary Provisions [Cabinet Order No. 338 of November 27, 2020]

(Effective Date)

(1)This Cabinet Order comes into effect on the day on which two months have elapsed from the date of promulgation.

(Transitional Measures Concerning Penal Provision)

(2)Prior laws continue to govern the applicability of penal provisions to acts committed prior to the enforcement of this Cabinet Order.

Supplementary Provisions [Cabinet Order No. 140 of April 7, 2021]

This Cabinet Order comes into effect on the date of promulgation.

Supplementary Provisions [Cabinet Order No. 59 of March 11, 2022]

(Effective Date)

(1)This Cabinet Order comes into effect on March 18, 2022.

(Transitional Measures Concerning Penal Provision)

(2)Prior laws continue to govern the applicability of penal provisions to acts committed prior to the enforcement of this Cabinet Order.

Supplementary Provisions [Cabinet Order No. 122 of March 29, 2022]

(Effective Date)

(1)This Cabinet Order comes into effect on April 5, 2022.

(Transitional Measures Concerning Penal Provision)

(2)Prior laws continue to govern the applicability of penal provisions to acts committed prior to the enforcement of this Cabinet Order.

Supplementary Provisions [Cabinet Order No. 135 of March 31, 2022]

This Cabinet Order comes into effect on April 1, 2022; provided, however, that the provisions of Article 1 (excluding the provisions of Article 1 amending Article 87 of the Order for Enforcement of the Customs Act), the provisions of Article 4, and the provisions of Article 7 (excluding the provisions of Article 7 amending Article 1, paragraph (1) of the Order for Enforcement of the Act on Processing, etc. of Business Related to Import and Export by Means of Electronic Data Processing System, the provisions amending the appended table, item (iv) of the same Order, the provisions amending item (iv)-2 of the same table, the provisions amending item (lxxix)-2 of the same table, and the provisions amending item (lxxxix)-4 of the same table) come into effect on the day on which the provisions stated in Article 1, item (iv) of the Supplementary Provisions of the Act Partially Amending the Patent Act (Act No. 42 of 2021) comes into effect.

Supplementary Provisions [Cabinet Order No. 191 of May 13, 2022]

This Cabinet Order comes into effect on May 20, 2022.

Supplementary Provisions [Cabinet Order No. 213 of June 10, 2022]

(Effective Date)

(1)This Cabinet Order comes into effect on June 17, 2022.

(Transitional Measures Concerning Penal Provision)

(2)Prior laws continue to govern the applicability of penal provisions to acts committed prior to the enforcement of this Cabinet Order.

Supplementary Provisions [Cabinet Order No. 318 of September 30, 2022]

This Cabinet Order comes into effect on October 7, 2022.

Supplementary Provisions [Cabinet Order No. 328 of October 6, 2022]

(Effective Date)

(1)This Cabinet Order comes into effect on the day on which two months have elapsed from the date of promulgation.

(Transitional Measures Concerning Penal Provision)

(2)Prior laws continue to govern the applicability of penal provisions to acts committed prior to the enforcement of this Cabinet Order.

Supplementary Provisions [Cabinet Order No. 17 of January 27, 2023]

This Cabinet Order comes into effect on February 3, 2023.

Appended Table 1 (Re: Articles 1 and 4)

	Goods	Regions
1	(i) Firearms, firearm ammunition (including those used to emit light or smoke), or accessories or their parts	All regions
	(ii) Explosives (excluding ammunition), explosive dispensers or launchers, or accessories or their parts
	(iii) Propellants (excluding explosives) or military fuels
	(iv) Stabilizers for propellant powders or other explosives
	(v) Directed energy weapons or their parts
	(vi) Kinetic energy weapons (excluding firearms) or projectiles, or their parts
	(vii) Military vehicles, their accessories, bridges specially designed for military use, or their parts
	(viii) Military vessels, their hulls or accessories, or their parts
	(ix) Military aircraft, their accessories, or their parts
	(x) Antisubmarine nets, anti-torpedo nets, or buoyant electric power cables for magnetic mine sweeping
	(xi) Armor plates, military helmets, body armors, or their parts
	(xii) Military searchlights or their control equipment
	(xiii) Biological warfare agents, chemical warfare (CW) agents, radioactive materials, or equipment or parts for the dissemination, protection, decontamination, detection, or identification or their parts
	(xiii)-2 Chemical mixtures specially formulated for the decontamination of biological warfare agents, CW agents, or radioactive materials
	(xiv) Biopolymers for the detection or identification of CW agents, cell cultures used for the production of those biopolymers, biocatalysts for the decontamination or degradation of CW agents, or expression vectors, viruses, or cell cultures that contain genetic codes required for the production
	(xv) Equipment and devices used in the production or testing of military propellants, or their parts
	(xvi) Equipment specially designed for the production of weapons, test devices, or parts or their accessories or their parts
	(xvii) Military satellites, or their parts
2	Goods stated below whose specifications comply with Order of the Ministry of Economy, Trade and Industry	All regions
	(i) Nuclear fuel materials or nuclear source materials
	(ii) Nuclear reactors, components, or their auxiliaries, or power-generating or propulsion equipment specially designed for nuclear reactors
	(iii) Deuterium and deuterium compounds
	(iv) Artificial graphite (excluding those stated in the middle column of row 4)
	(v) Equipment specially designed for the separation or reprocessing of irradiated nuclear fuel materials or nuclear source materials, or components or controllers and their parts
	(vi) Equipment for the separation of lithium isotopes, or equipment for the fabrication of nuclear fuel materials
	(vii) Equipment for the separation of uranium or plutonium isotopes or their auxiliaries, or their components (excluding those stated in (xxxi) below)
	(viii) Frequency changers usable for gas centrifuges, or their components
	(ix) Nickel powders, or porous metals produced from those powders
	(x) Equipment usable for the production of deuterium or deuterium compounds, or components or their auxiliaries
	(x)-2 Equipment for the production of uranium trioxide, uranium hexafluoride, uranium dioxide, uranium tetrafluoride, uranium metal, uranium tetrachloride, plutonium dioxide, plutonium oxalate, plutonium peroxide, plutonium trifluoride, plutonium tetrafluoride, or plutonium metal, or their auxiliaries , or components of the equipment and their auxiliaries
	(xi) Flow-forming machines for the production of gas centrifuges, or their components (excluding those stated in the middle column of row 4)
	(xii) Machine tools or other equipment stated below and used in the development and production of nuclear weapons
	(1) Numerically-controlled machine tools
	(2) Measuring equipment (including machine tools with a measurement function)
	(xiii) Induction furnaces, arc furnaces, plasma melting furnaces, electron-beam melting furnaces, or components or their auxiliaries
	(xiv) Isostatic presses, or components or its controllers (excluding those stated in the middle column of row 4)
	(xv) Robots set forth below, or components or their controllers
	(1) Explosion-proof robots
	(2) Radiation-proof robots
	(xvi) Vibration test equipment or its components (excluding those stated in the middle column of row 4)
	(xvii) Structural materials stated below and usable for gas centrifuge rotors (excluding those stated in the middle column of row 4)
	(1) Aluminum alloys
	(2) Carbon fibers, aramid fibers, glass fibers, or prepregs made from carbon fibers or glass fibers, or molded products made with carbon fibers or aramid fibers
	(3) Maraging steels
	(4) Titanium alloys
	(xviii) Metals, waste, or scraps of beryllium or beryllium alloys, or beryllium compounds, or primary or semi-finished products of them (excluding primary or semi-finished products of beryllium oxide used in electronics parts)
	(xix) Substances used as alpha sources for the detonation of nuclear weapons, or raw materials therefor (excluding those stated in (i) above)
	(xx) Boron-10
	(xxi) Substances used as reducing or oxidizing agents for the production of nuclear fuel materials
	(xxii) Crucibles made with materials which are corrosion-resistant against actinide
	(xxiii) Metals, waste or scraps of hafnium or hafnium alloys, or hafnium compounds, or primary or semi-finished products of them
	(xxiv) Metals, waste or scraps of lithium or lithium alloys, lithium compounds or mixtures containing lithium, or primary or semi-finished products of them
	(xxv) Primary products of tungsten, tungsten carbide or alloys (limited to those that have cylindrical or hemispherical shapes or a combination of both shapes)
	(xxvi) Metals, waste, or scraps of zirconium or zirconium alloys, or zirconium compounds, or primary or semi-finished products of them
	(xxvii) Electrolytic cells for fluorine production
	(xxviii) Equipment for the production or assembly of gas centrifuge rotors, or their components
	(xxix) Centrifugal balancing machines (excluding single-plane balancing machines)
	(xxx) Filament winding machines, or their components or controllers
	(xxxi) Gas laser oscillators, solid-state laser oscillators, or dye laser oscillators usable for the separation of uranium isotopes
	(xxxii) Mass spectrometers or ion sources usable for the analysis of nuclear fuel materials
	(xxxiii) Pressure gauges or bellows valves using materials which are corrosion-resistant against uranium hexafluoride (excluding those stated in the middle column of row 3)
	(xxxiv) Superconducting solenoid electromagnets
	(xxxv) Vacuum pumps used in separators for uranium isotopes (excluding those stated in the middle column of row 3)
	(xxxv)-2 Scroll-type compressors or vacuum pumps that use bellows seals (excluding those stated in (xxxv) and the middle column of row 3)
	(xxxvi) Direct current power units with lower fluctuations of voltage and current
	(xxxvii) Electron accelerators or flash X-ray generators (excluding those stated in the middle column of row 4)
	(xxxviii) Impact testing machines using projectiles
	(xxxix) High speed cameras or components of them
	(xl) Interferometers for measuring fluid velocities, pressure gauges, or quartz pressure transducers
	(xli) Goods stated below and usable for the detonation or testing of nuclear weapons
	(1) Cold-cathode tubes containing three or more electrodes
	(2) Triggered spark gaps
	(3) Assemblies with a fast high-current switching function
	(4) Pulse discharge capacitors
	(5) Pulse generators
	(6) Xenon flashlamp drivers
	(7) Components of detonators
	(xlii) Photomultiplier tubes with short anode pulse rise time
	(xliii) Neutron generators utilizing electrostatic acceleration to induce a tritium-deuterium or deuterium-deuterium nuclear reaction
	(xliv) Remote manipulators used in the prevention of radioactive exposure
	(xlv) Radiation shielding designed windows or their frames
	(xlvi) TV cameras or lenses specially designed for their protection from the influence of radiation
	(xlvii) Tritium, or tritium compounds or mixtures containing tritium
	(xlviii) Equipment used in the production, collection, or preservation of tritium, or components used in equipment for producing tritium
	(xlix) Platinized catalysts for the collection of tritium from heavy water or for the production of heavy water
	(l) Helium-3
	(li) Primary products of rhenium, rhenium alloys, or rhenium-tungsten alloys
	(lii) Explosion-proof containers
3	(i) Substances for raw materials of CW agents, or substances having equivalent toxic ability with CW agents, or their raw materials specified by Order of the Ministry of Economy, Trade and Industry	All regions
	(ii) Equipment, as follows, for production of CW agents, or components or accessories, therefor and specified by Order of the Ministry of Economy, Trade and Industry
	(1) Reactor vessels or reactors
	(2) Storage tanks, containers or receivers
	(3) Heat exchangers or condensers, or their components
	(4) Distillation or absorption columns, or their parts
	(5) Filling equipment
	(6) Agitators or their components
	(7) Valves or their components
	(8) Multi-walled piping
	(9) Pumps and components
	(10) Incinerators
	(11) Gas monitoring systems and dedicated detectors
	(iii) Assemblies used in the repair and their components stated in (ii) (1) or (2) above, and specified by Order of the Ministry of Economy, Trade and Industry
3-2	(i) Organisms or toxins, or subunits or their genes used as raw materials for biological warfare agents and specified by Order of the Ministry of Economy, Trade and Industry	All regions
	(ii) Equipment, as follows, for development, production or delivery of biological warfare agents, or components therefor, and specified by Order of the Ministry of Economy, Trade and Industry
	(1) Complete containment facilities
	(2) Fermenters, or their components
	(3) Centrifuge separators
	(4) Cross (tangential) flow filtration equipment and its components
	(5) Freeze-drying equipment;
	(5)-2 Spray-drying equipment
	(6) Protectors and containment equipment
	(7) Aerosol inhalation chambers
	(8) Spraying or fogging systems and their components
	(9) Nucleic acid assemblers and synthesizers
4	Goods stated below whose specifications comply with Order of the Ministry of Economy, Trade and Industry	All regions
	(i) Rockets, or equipment or tools for the production therefor (including molds; the same apply below), or test equipment, or their components
	(i)-2 Unmanned aerial vehicles, or equipment or tools for their production, or test equipment, or their components
	(ii) Individual rocket stages, or re-entry vehicles or their components ; guidance sets or thrust vector controllers; or equipment or tools for producing them, equipment for testing them, or their parts
	(iii) Propulsion units stated below or their components , linings for rocket motor cases, insulation materials, or separation mechanism or staging mechanisms for multiple-stage rockets, or equipment or tools for their production , or test equipment, or its components
	(1) Rocket propulsion equipment
	(2) Turbojet engines, turbofan engines, ramjet engines, scramjet engines, pulse jet engines, detonation engines, combined cycle engines, or turboprop engines
	(iv) Flow-forming machines or their components
	(v) Goods stated below and used for propellant controllers
	(1) Servo valves
	(2) Pumps
	(3) Gas turbines
	(v)-2 Bearings usable for the goods stated in (v), (2)
	(vi) Propellants or raw materials therefor
	(vii) Equipment or tools for the production of goods stated (vi) above, or test equipment, or its components
	(viii) Continuous mixers or batch mixers (excluding those for liquids), or their components
	(ix) Jet mills, or equipment for the production of metal powders, or components therefor
	(x) Equipment for the production of composites, fibers, prepregs, or preforms, or parts or their accessories
	(xi) Nozzles used in fixing substances generated from the thermal decomposition of gas onto substrates
	(xii) Equipment for production of nozzles of rocket propulsion systems or re-entry vehicle nose tips, or process controls therefor
	(xiii) Isostatic presses or their controllers
	(xiv) Furnaces designed for the densification of carbon in carbon composites, or their controllers
	(xv) Structural materials stated below usable for rockets or unmanned aerial vehicles
	(1) Composites or their molded products
	(2) Artificial graphite
	(3) Powders principally made from tungsten, molybdenum, or alloys of these metals
	(4) Maraging steels
	(5) Austenitic-ferritic stainless steels stabilized by titanium
	(xvi) Equipment stated below usable for rockets or unmanned aerial vehicles, or their components , or equipment or tools for the production of these equipment and components, test equipment, calibration equipment, or alignment equipment, or components of these equipment and devices
	(1) Accelerometers
	(2) Gyroscopes
	(3) Equipment using goods stated in (1) and (2) above
	(4) Navigation equipment
	(5) Magnetic director sensors
	(xvii) Flight controllers or altitude control equipment for rockets or unmanned aerial vehicles, or test equipment, calibration equipment, or alignment equipment therefor
	(xviii) Avionics equipment or its components
	(xix) Gravity meters or gravity gradiometers for use in aircraft or vessels
	(xx) Launch pads for rockets or unmanned aerial vehicles, or associated ground launch support equipment
	(xxi) Radio telemetry equipment, radio telecontrol equipment, or tracking devices usable for rockets or unmanned aerial vehicles
	(xxii) Electronic computers on board rockets
	(xxiii) Analog-to-digital converters usable for rockets or unmanned aerial vehicles
	(xxiv) Vibration test equipment or its components , or aerodynamic test equipment, combustion test equipment, environment test equipment, electron accelerators usable for the development or testing of rockets or unmanned aerial vehicles, or equipment using therefor
	(xxiv)-2 Electronic computers used in designing rockets
	(xxv) Materials or equipment used in reducing the level of the reflection or emission of acoustic waves (including ultrasound; the same apply below ), electromagnetic waves, or light, or test equipment therefor
	(xxvi) Integrated circuits, detectors, or radomes usable for rockets or unmanned aerial vehicles
5	Goods stated below whose specifications comply with Order of the Ministry of Economy, Trade and Industry	All regions
	(i) Products of fluorine compounds designed for use in aircraft, satellites, or other types of spacecraft for space development
	(ii) Deleted
	(iii) Aromatic polyimide products
	(iv) Tools used in the superplastic forming or diffusion bonding of titanium, aluminum, or alloys of these metals
	(v) Alloys or powders of nickel, titanium, niobium, aluminum, or magnesium, or equipment for producing those alloys or powders, or their components or their accessories (excluding those stated in row 2)
	(vi) Metallic magnetic materials
	(vii) Uranium-titanium alloys, or tungsten alloys (excluding those stated in the middle column of row 2)
	(viii) Superconductive materials
	(ix) Deleted
	(x) Lubricating materials mainly containing phenylene ethers, alkylphenylene ethers, phenylene thioethers, or alkylphenylene thioethers, or their mixtures
	(xi) Vibration control liquid mainly containing dibromotetrafluoroethanes, polychlorotrifluoroethylenes, or polybromotrifluoroethylenes
	(xii) Refrigerant liquid mainly containing the monomers of perfluoro-polyalkyl ether triazines or perfluoro aliphatic ethers, perfluoroalkylamines, perfluorocycloalkanes, or perfluoroalkanes
	(xiii) Ceramic powders produced using titanium boride
	(xiv) Ceramic composites mainly consisting of glass, oxide, silicon, zirconium, boron carbon or nitride
	(xv) Polydiorganosilane, polysilazane, or polycarbosilazane
	(xvi) Bismaleimide, aromatic polyamideimide, aromatic polyimide, aromatic polyetherimide, poly arylene ketone, polyarylene sulfide, or polybiphenyl ether sulfone
	(xvii) Fluorinated polyimides, or fluorinated phosphazene elastomers
	(xviii) Organic fibers, carbon fibers, inorganic fibers, or fibers made from materials stated in (xvi) above, or prepregs, preforms, or molded products using these fibers, production equipment therefor, or components or accessories therefor (excluding those stated in the middle column of rows 2, 4, and 15)
	(xix) Boron, compounds therefor, boron alloy, compounds therefor, guanidine nitrate, or nitroguanidine (excluding those stated in the middle column of rows 2 and 4)
6	Goods stated below whose specifications comply with Order of the Ministry of Economy, Trade and Industry (excluding those stated in the middle column of row 2)	All regions
	(i) Bearings or their components (excluding those stated in the middle column of row 4)
	(ii) Numerically-controlled machine tools
	(iii) Gear producing machine tools
	(iv) Isostatic presses, or components or accessories therefor (excluding those stated in the middle column of row 4)
	(v) Coating equipment, or components used for the automatic manipulation of these devices
	(vi) Measuring equipment (including machine tools with a measurement function) stated below
	(1) Computer controlled or numerically-controlled coordinate measuring equipment
	(2) Linear and angular displacement measuring equipment
	(3) Equipment for measuring surface roughness
	(vii) Robots stated below, or their components or controllers
	(1) Robots of explosion proof construction
	(2) Radiation hardened robots
	(3) Robots designed for use at high altitudes
	(viii) Feedback equipment, compound rotary tables, or tilting spindles that can change the angle of the centerline to another axis during grinding or cutting operations
	(ix) Spin-forming machines
7	Goods stated below whose specifications comply with Order of the Ministry of Economy, Trade and Industry	All regions
	(i) Integrated circuits (excluding those stated in the middle column of row 4)
	(ii) Microwave equipment or its components , or components of millimeter wave equipment
	(iii) Signal processing equipment utilizing elastic waves or acoustic-optic effects, or their components
	(iv) Equipment using superconducting materials
	(v) Superconducting electromagnets (excluding those stated in the middle column of row 2)
	(vi) Primary, secondary, or solar batteries
	(vii) High energy storage capacitors (excluding those stated in the middle column of row 2)
	(viii) Encoders or components therefor (excluding those stated in the middle column of row 4)
	(viii)-2 Thyristor devices or thyristor modules switching pulse output
	(viii)-3 Semiconductor devices or semiconductor modules controlling power or rectifying electric signals
	(viii)-4 Phase electro-optic modulators
	(ix) Sampling oscilloscopes
	(x) Analog-digital converters (excluding those stated in the middle column of row 4)
	(xi) Digital recorders
	(xii) Signal generators using frequency synthesizers
	(xiii) Frequency signal analyzers
	(xiv) Network analyzers
	(xv) Atomic frequency standards
	(xv)-2 Spray cooling thermal management systems
	(xvi) Equipment for manufacturing or testing of semiconductor devices, integrated circuits, or semiconductor materials, or their components or their accessories
	(xvii) Masks or reticles, or components or their accessories (excluding those stated in the middle column of row 10)
	(xvii)-2 Base materials used in the production of masks
	(xviii) Semiconductor substrates
	(xix) Resists
	(xx) Organometallic compounds of aluminum, gallium, or indium, or organic compounds of phosphorus, arsenic, or antimony
	(xxi) Hydrides of phosphorus, arsenic, or antimony
	(xxii) Silicon carbide wafer, gallium nitride wafer, aluminum nitride wafer, aluminum gallium nitride wafer, gallium oxide (Ga2O3), wafer or diamond wafer (excluding those set forth in the (xviii)), or ingots, boules, or other preforms of those materials
	(xxiii) Polycrystalline substrates (excluding those stated in (18) and (22))
8	Electronic computers, auxiliaries or components therefor (excluding those stated in the middle column of row 4) whose specifications comply with Order of the Ministry of Economy, Trade and Industry	All regions
9	Goods stated below whose specifications comply with Order of the Ministry of Economy, Trade and Industry	All regions
	(i) Transmission telecommunication equipment, or components or accessories therefor (excluding those stated in the middle column of row 15)
	(ii) Electronic changers
	(iii) Telecommunication optical fibers
	(iv) Deleted
	(v) Phased array antennas
	(v)-2 Radio direction finding equipment for monitoring use or its components
	(v)-3 Radio communication interception equipment or communication jamming equipment, or equipment monitoring its operation, or components therefor
	(v)-4 Equipment that can detect a position by monitoring interference of electric waves or other electromagnetic waves without sending out electric waves or other electromagnetic waves
	(v)-5 Equipment monitoring communication by the method of using the Internet, or its components
	(vi) Equipment for the development, production, measurement, or test of goods stated in (i) through (iii), or (v) through (v)-5 above, or components or accessories therefor
	(vii) Cryptographic equipment or its components
	(viii) Equipment designed to prevent the leakage of information transmission signals, or components therefor
	(ix) Deleted
	(x) Communication cable systems capable of detecting wiretapping, or components therefor
	(xi) Equipment for the design, production, or measurement of goods stated in (vii), (viii), or (x) above
10	Goods stated below whose specifications comply with Order of the Ministry of Economy, Trade and Industry	All regions
	(i) Underwater acoustic equipment utilizing acoustic waves, acoustic equipment for determining the position of vessels, measuring equipment for the horizontal speed of the equipment carrier relative to the seabed at distances between the carrier and the seabed, or components therefor (excluding those stated in the middle column of row 15)
	(ii) Optical detectors or coolers therefor, or components for those detectors or coolers, or equipment using optical detectors (excluding those stated in the middle column of rows 2 and 15)
	(iii) Optical sensing fibers (excluding those stated in the middle column of row 9)
	(iv) Electronic cameras, or their components (excluding those stated in the middle column of row 2)
	(v) Reflectors
	(vi) Optical components made from zinc selenide or zinc sulfide, or those designed for space applications
	(vii) Controllers of optical equipment or components
	(vii-2) Aspherical optical elements
	(viii) Laser oscillators or components or accessories or test equipment therefor (excluding those stated in the middle column of row 2)
	(viii)-2 Equipment to detect sounds by utilizing laser beams
	(ix) Magnetometers, underwater electric field sensors or magnetic gradiometers, calibration equipment or their components
	(ix)-2 Equipment to detect a magnetic field or electric field underwater (limited to equipment installed with magnetometers or underwater electric field sensors)
	(x) Gravity meters or gravity gradiometers (excluding those stated in the middle column of row 4)
	(xi) Radars or components therefor (excluding those stated in the middle column of rows 4 and 15)
	(xi) -2 Masks or reticles for producing optical sensors
	(xii) Light reflectance measuring apparatus or lenses, or non-contact devices designed to measure the surface shapes of reflectors
	(xiii) Equipment for producing or calibrating gravity meters
	(xiv) Materials for optical detectors or other optical components, or crystals used in laser oscillators
11	Goods stated below (excluding those stated in the middle column of row 4) whose specifications comply with Order of the Ministry of Economy, Trade and Industry	All regions
	(i) Accelerators or their components
	(ii) Gyroscopes or their components
	(iii) Inertial navigation systems or other equipment utilizing inertial forces
	(iv) Gyro-astro compasses, devices that derive position or orientation by means of automatically tracking celestial bodies or satellites, electromagnetic wave receivers for global navigation satellite systems, components therefor, or airborne altimeters
	(iv)-2 Underwater sonar navigation equipment or components therefore (excluding those stated in the middle column of rows 10 and 15)
	(v) Equipment for testing, calibrating, aligning, or producing those stated in (i) through (iv)-2 above
12	Goods stated below whose specifications comply with Order of the Ministry of Economy, Trade and Industry	All regions
	(i) Submersible vessels (excluding those stated in the middle column of rows 1 and 15)
	(ii) Vessel components or accessories (excluding those stated in the middle column of rows 1 and 15)
	(iii) Ocean salvage systems with lifting capabilities
	(iv) Underwater lighting systems
	(v) Underwater robots (excluding those stated in the middle column of rows 2 and 6)
	(vi) Air independent power systems
	(vii) Water tunnels
	(viii) Buoyancy materials
	(ix) Self-contained diving equipment (closed or semi-closed circuit types)
	(x) Equipment to prevent human activity underwater by utilizing acoustic waves
13	Goods stated below (excluding those stated in the middle column of row 4) whose specifications comply with Order of the Ministry of Economy, Trade and Industry	All regions
	(i) Gas turbine engines or components therefor
	(ii) Satellites or other types of projectile for space development, or components therefor
	(ii)-2 Systems installed on the ground which are necessary for controlling satellites or other types of projectile for space development or monitoring their operating conditions
	(iii) Rocket propulsion systems or their components
	(iv) Unmanned aerial vehicles or components or accessories therefor
	(v) Equipment for the test, measurement, or inspection of the items stated in (i) through (iv) above or in (x) of row 15, equipment or tools for the production of those items, or their components
14	(i) Metallic fuel in particle form (including aluminum powders, but excluding those stated in the middle column of row 4) whose specifications comply with Order of the Ministry of Economy, Trade and Industry	All regions
	(ii) Substances (excluding the items stated in the middle column of row 4) that are major components, additives, or precursors of propellant powders or other prepared explosives; and whose specifications comply with Order of the Ministry of Economy, Trade and Industry
	(iii) Diesel engines using nonmagnetic materials or components therefor, that have specifications that comply with Order of the Ministry of Economy, Trade and Industry
	(iv) Deleted
	(v) Self-contained diving equipment or components therefor, those whose specifications comply with Order of the Ministry of Economy, Trade and Industry (excluding those stated in the middle column of row 12)
	(vi) Construction machinery specially designed for aerial transportation, or components therefor
	(vii) Robots or their controllers, or their components, whose specifications comply with Order of the Ministry of Economy, Trade and Industry (excluding the items stated in the middle column of rows 2, 6, and 12)
	(viii) Electrically controlled shutters (excluding those specially designed for cameras) whose specifications comply with Order of the Ministry of Economy, Trade and Industry
	(ix) Tear gases or riot agents (excluding those used for self-defense purposes), equipment for the spray, detection, or identification of these materials, protective equipment against these materials, or its components, those whose specifications comply with Order of the Ministry of Economy, Trade and Industry
	(x) Equipment to remove or otherwise dispose of improvised explosive devices, or components or accessories therefor, whose specifications comply with Order of the Ministry of Economy, Trade and Industry
	(xi) Electronic equipment which is designed to automatically detect or identify explosives, and whose specifications comply with Order of the Ministry of Economy, Trade and Industry
15	Goods stated below whose specifications comply with Order of the Ministry of Economy, Trade and Industry	All regions
	(i) Molded goods using inorganic fibers or using fibers made of goods stated in (xvi) of row 5
	(ii) Electric wave or infrared ray absorbers or conductive polymers (excluding those stated in the middle column of row 4)
	(iii) Nuclear heat source materials (excluding those stated in the middle column of row 2)
	(iv) Digitally controlled transmission telecommunication equipment and systems with more than 1,000 channels, or components or their accessories
	(iv)-2 Radio transmitters designed to explode improvised explosive devices before they reach their target or to prevent the explosion , or their accessories
	(v) Underwater acoustic equipment utilizing acoustic waves, or their components
	(vi) Optical detectors specially designed for space applications
	(vii) Radars that have a pulse duration of no more than 100 nanoseconds, or components therefor
	(viii) Submersible vessels that can cruise independently (excluding those stated in the middle column of row 1)
	(ix) Soundproofing devices for use in vessels whose displacement exceeds 1,000 tonnages (excluding those stated in the middle column of row 1)
	(x) Ramjet engines, scramjet engines, combined cycle engines, or their components (excluding those stated in the middle column of row 4)
16	Goods that fall under Class 25 through Class 40, Class 54 through Class 59, Class 63, Class 68 through Class 93, or Class 95 of Appended table of Custom Tariff Act (Act No. 54 of 1910) (excluding those stated in the middle column of rows 1 through 15)	All regions (excluding regions stated in Appended table 3)

Appended Table 2 (Re: Articles 2, 4 and 12)

	Goods	Regions
1	Diamonds (limited to those specified by the Minister of Economy, Trade and Industry by public notice)	All regions
2	Deleted
3	Deleted
4	Deleted
5	Deleted
6	Deleted
7	Deleted
8	Deleted
9	Deleted
10	Deleted
11	Deleted
12	Deleted
13	Deleted
14	Deleted
15	Deleted
16	Deleted
17	Deleted
18	Deleted
19	Blood products prescribed in Article 2, paragraph (1) of the Act on Securing a Stable Supply of Safe Blood Products (Act No. 160 of 1956) that are specified by the Minister of Economy, Trade and Industry by public notice	All regions
20	Nuclear source materials and nuclear fuel materials (these nuclear fuel materials include spent fuels as prescribed in, Article 2, paragraph (10) of the Act on the Regulations of Nuclear Material Substances, Nuclear Fuel Substances and Nuclear Reactors (Act No. 166 of 1957); the same apply below )	All regions
21	Waste specified by the Minister of Economy, Trade and Industry by public notice as the waste of materials stated below	All regions
	(i) Materials contaminated by nuclear source materials or nuclear fuel materials
	(ii) Materials separated from spent fuels, and materials contaminated by those materials
	(iii) Radioactive isotopes, compounds thereof, materials containing those isotopes or compounds (including those equipped with machinery and equipment), and materials contaminated by those isotopes or compounds (excluding those stated in (i) and (ii) above)
21-2	Radioactive isotopes prescribed in Article 2, paragraph (2) of the Act on the Regulation of Radioisotopes (Act No. 167 of 1957) and specified by the Minister of Economy, Trade and Industry by public notice	All regions
21-3	Chemical substances specified by Order of the Ministry of Economy, Trade and Industry as raw materials for narcotics and psychotropic substances prescribed in Article 2, item (vii) of the Narcotics and Psychotropics Control Act (Act No. 14 of 1953), or other narcotic or psychotropic substances	All regions
22	Deleted
23	Deleted
24	Deleted
25	Ships listed below (excluding those operated with paddles or sails only)	All regions
	(a) Ships equipped with fishing equipment or machines
	(b) Ships equipped with manufacture equipment for the processed products of freshly-caught fish and other marine organisms
	(c) Ships equipped with storage facilities for freshly-caught fish and other marine organisms (only those equipped with storage facilities that can be loaded with freshly-caught fish and other marine organisms at fishing grounds)
26	Deleted
27	Deleted
28	Deleted
29	Deleted
30	Mycelia of lentinus edodes	All regions
31	Deleted
32	Deleted
33	Glass eels and eel fries	All regions
34	Frozen clams and mussels	U.S.A.
35	Substances stated in Annexes A, B, C, and E of the Montreal Protocol on Substances that Deplete the Ozone Layer	All regions
35-2	(i) Specified hazardous wastes prescribed in Article 2, paragraph (1) of the Act on the Control of Import, Export, of Specified Hazardous Wastes and Other Wastes (Act No. 108 of 1992)	All regions (excluding the high seas northward of 60 degrees of south latitude)
	(ii) Wastes prescribed in Article 2, paragraph (1) of the Act on Waste Management and Public Cleansing (excluding those stated in (i) above)
35-3	(i) Chemical substances stated in the left column of Annex III of the Rotterdam Convention on the Prior Informed Consent Procedure for Certain Hazardous Chemicals and Pesticides in International Trade	All regions
	(ii) Chemical substances which are contained in the agricultural chemicals prescribed in Article 2, paragraph (1) of the Agricultural Chemicals Control Act (Act No. 82 of 1948) (limited to agricultural chemicals listed below); and are specified by the Minister of the Ministry of Economy, Trade and Industry by public notice
	(1) Agricultural chemicals for which the registration application was refused under Article 4, paragraph (1) of the Agricultural Chemicals Control Act (including as applied mutatis mutandis pursuant to Article 34, paragraph (6) of the same Act) for the reason that they are found to fall under any of the provisions of Article 4, paragraph (1), item (v) through (ix) or item (xi) of the Act (including as applied mutatis mutandis pursuant to Article 34, paragraph (6) of the same Act; the same apply in (2) through (4))
	(2) Agricultural chemicals for which the registration was cancelled under Article 9, paragraph (2) of the Agricultural Chemicals Control Act (including as applied mutatis mutandis pursuant to Article 34, paragraph (6) of the same Act) for the reason that they are found to fall under any of the provisions of Article 4, paragraph (1), item (v) through (ix) or item (xi) of the same Act
	(3) Agricultural chemicals for which the registration was cancelled under Article 9, paragraph (3) of the Agricultural Chemicals Control Act (including as applied mutatis mutandis pursuant to Article 34, paragraph (6) of the same Act) for the reason that any events prescribed in Article 4, paragraph (1), item (v) through (ix) or item (xi) of the same Act have occurred
	(4) Agricultural chemicals of which sales were prohibited under Article 18, paragraph (2) of the Agricultural Chemicals Control Act for the reason that it is necessary to prohibit their sales in order to prevent any events prescribed in Article 4, paragraph (1), item (v) through (ix) or item (xi) of the same Act from occurring
	(iii) Specified poisonous substances prescribed in Article 2, paragraph (3) of the Poisonous and Deleterious Substances Control Act (Act No. 303 of 1950) (excluding those stated in (1) above)
	(iv) Chemical substances specified by the Minister of Economy, Trade and Industry by public notice which are contained in the pesticides that are pharmaceutical products prescribed in Article 2, paragraph (1) of the Pharmaceutical Affairs Act (Act No. 145 of 1960) or quasi-pharmaceutical products prescribed in Article 2, paragraph (2) of the same Act (limited to pesticides listed below)
	(1) Pesticides that are pharmaceutical products or quasi-pharmaceutical products for which an approval has not been granted under Article 14, paragraph (2), item (iii), (b) of the Pharmaceutical Affairs Act for the reason that they fall under that Article
	(2) Pesticides that are pharmaceutical products or quasi-pharmaceutical products for which the approval was withdrawn under Article 74-2, paragraph (1) of the Act on Securing Quality, Efficacy and Safety of Products Including Pharmaceuticals and Medical Devices for the reason that they fall under Article 14, paragraph (2), item (iii), (b) of the Act
	(v) Materials stated in Article 16, paragraph (1), items (ii) through (vii), and item (ix) of Order for Enforcement of the Industrial Safety and Health Act (Cabinet Order No. 318 of 1972) (these materials exclude those stated in (i) above, and in cases of those stated in the abovementioned items, are limited to those determined specified by the Minister of the Ministry of Economy, Trade and Industry by public notice)
	(vi) Class 1 specified chemical substances prescribed in Article 2, paragraph (2) of the Act on the Evaluation of Chemical Substances and Regulation of Their Manufacturing (Act No. 117 of 1973) (excluding those stated in (i) above)
35-4	(i) Mercury prescribed in Article 3, 1 (a) of the Minamata Convention on Mercury	All regions
	(ii) Specified products containing mercury as prescribed in Article 2, paragraph (1) of the Act on Preventing Environmental Pollution of Mercury (Act No. 42 of 2015) and products using them as components
36	Animals or plants that belong to the species stated in Appendices I or II of the Convention on International Trade in Endangered Species of Wild Fauna and Flora, or parts, eggs, seeds, specimens, processed products, or other derivatives of those animals or plants (excluding those stated in the middle columns of rows 37 and 43; limited to those specified by the Minister of the Ministry of Economy, Trade and Industry by public notice)	All regions
37	Individuals, organs, and processed products (these products exclude those stated in the middle column of row 43) as prescribed in Article 6, paragraph (2), item (iv) of the Act on Conservation of Endangered Species of Wild Fauna and Flora (Act No. 75 of 1992) of the endangered species of wild fauna and flora prescribed in Article 4, paragraph (2) of the same Act (the abovementioned endangered species exclude those stated in the middle column of row 43; and are limited to those set forth in Table 1 of Appended Tables II of the Order for Enforcement of the Act on Conservation of Endangered Species of Wild Fauna and Flora (Cabinet Order No. 17 of 1993) in cases of internationally endangered species of wild fauna and flora prescribed in Article 4, paragraph (4) of the same Act)	All regions
38	Japanese mist nets	All regions
39	Counterfeit, altered, or imitated currencies, postage stamps, or revenue stamps	All regions
40	Books, drawings, and other goods that call for or incite revolts	All regions
41	Books, drawings, sculptures, and other goods that may corrupt public morals	All regions
42	Deleted	All regions
43	National treasures, important cultural properties, important tangible folk-cultural properties, special natural monuments, natural monuments, and art treasures (in cases of special natural monuments and natural monuments, they are limited to those specified by the Minister of Economy, Trade and Industry by public notice)	All regions
44	Goods that may infringe on patent rights, utility model rights, design rights, trademark rights, or copyrights in destination countries or may cause misunderstanding about their country of origin; and are designated by the Minister of Economy, Trade and Industry	All regions
45	Goods for which qualification procedures were taken under Article 69-12, paragraph (1) of the Customs Act (Act No. 61 of 1954) (excluding those ordered to be reshipped in accordance with Article 69-11, paragraph (2) of the same Act, those certified under Article 69-12, paragraph (6) of the Act not to fall under goods stated in Article 69-11, paragraph (1), items (ix) through (x) of the same Act, and those for which qualification procedures were cancelled under Article 69-15, paragraph (10), or Article 69-20, paragraph (11) of the same Act)	All regions

Appended Table 2-2 (Re: Articles 2 and 4)

(i)beef (limited to frozen beef);

(ii)fish fillets (limited to frozen fillets specified by public notice from the Minister of Economy, Trade and Industry);

(iii)caviar and caviar substitutes made from fish eggs;

(iv)alcoholic beverages;

(v)manufactured tobacco and manufactured tobacco substitutes;

(vi)perfume and cologne;

(vii)cosmetic, makeup, or skincare preparations (including sunblock and suntanning preparations, but excluding pharmaceutical products) and fingernail or toenail nail polish preparations;

(viii)trunks, suitcases, cosmetics bags, executive cases, briefcases, school bags, or other equivalent containers (limited to those with an outer surface made of leather, composition leather, or patent leather);

(ix)handbags (limited to those with an outer surface made of leather, composition leather, or patent leather);

(x)wallets or other goods usually carried in a pocket or handbag (limited to those with an outer surface made of leather, composition leather, or patent leather);

(xi)clothes and their accessories (limited to those made of leather or composition leather);

(xii)fur coats or other fur products and artificial fur products;

(xiii)carpets or other floor coverings made of woven fabric;

(xiii)-2tapestries (limited to those specified by public notice from the Minister of Economy, Trade and Industry);

(xiii)-3porcelain tableware (limited to those specified by public notice from the Minister of Economy, Trade and Industry);

(xiv)glass products (limited to those made of lead glass specified by public notice from the Minister of Economy, Trade and Industry);

(xv)natural or cultivated pearls, precious stones, semiprecious stones, specified metals (meaning silver, gold, white gold, iridium, osmium, palladium, rhodium, and ruthenium; the same applies below) and metals coated with specified metals and their products;

(xvi)portable digital automatic data processors (limited to those at least consisting of a central processing unit, keyboard, and display);

(xvii)microphones and stands for them, loudspeakers, headphones and earphones, combinations of microphones and loudspeakers, audio amplifiers, and electric sound amplifiers;

(xviii)sound reproducers, recorders, and equipment for recording or reproducing videos, and their components and accessories;

(xix)media for recording sound or their equivalent (excluding those holding photographs or moving pictures but including those holding sound recordings or their equivalent);

(xx)video camera recorders and digital cameras;

(xxi)radio receivers (including those that can receive cordless telephones or radiotelegraphy);

(xxii)television sets (limited to color television sets specified by public notice from the Minister of Economy, Trade and Industry), video monitors (limited to color video monitors), and video projectors;

(xxiii)automobiles and vehicles specially designed for driving in snow (in the case of vehicles specially designed for driving in snow, limited to those specified by public notice from the Minister of Economy, Trade and Industry);

(xxiv)motorcycles (including mopeds) and motor-assisted bicycles;

(xxv)yachts and other ships and canoes for recreational or sporting use;

(xxvi)cameras (limited to single-lens reflex cameras);

(xxvii)moving picture cameras and projectors;

(xxviii)projectors, photographic enlargers, and photographic reducers (excluding those for moving pictures);

(xxix)projection screens;

(xxx)wristwatches, pocket watches, or other portable watches (including stopwatches);

(xxxi)musical instruments and their components and accessories;

(xxxi)-2sports gear, and their components and accessories (limited to those specified by public notice from the Minister of Economy, Trade and Industry);

(xxxii)fountain pens;

(xxxiii)works of art, collections, and antiques.

Appended Table 2-3 (Re.: Articles 2 and 4)

(i)goods listed in the middle column of rows 1 through 15 of Appended Table 1;

(i)-2goods stated below that have been specified by Order of the Ministry of Economy, Trade and Industry (excluding the goods stated in the preceding item):

(a)substances used as raw materials of chemical warfare agents and substances having toxic ability equivalent to that of chemical warfare agents and substances used as raw materials thereof;

(b)goods stated below, which are part of the equipment used for manufacture of chemical warfare agents and their components and accessories;

1.reaction vessels;

2.storage tanks;

3.heat exchangers and condensers;

4.distillation or absorption columns;

5.agitators;

6.valves;

7.pumps and their components;

8.floor-mounted fume hoods;

9.equipment for the analysis or detection of chemical substances, and its components and accessories;

10.electrolytic cells and their components;

11.compressors;

(c)the goods stated below, which are part of the equipment used for manufacture of chemical warfare agents and their components

1.equipment used for physical containment and their components;

2.fermenters;

3.centrifuges;

4.protective equipment used in physical containment facilities;

5.equipment that is for synthesizing or combining nucleic acids;

(ii)the goods stated below that have been specified by Order of the Ministry of Economy, Trade and Industry (excluding the goods stated in the preceding two items):

1. integrated circuits, analog-to-digital converters, components of microwave equipment or of millimeter wave equipment, signal processing devices employing elastic waves and their components, primary cells, secondary cells, solar cells, superconductive electromagnets, devices using superconductive materials, and discharge tubes;

2. electronic test equipment, analog or digital recording devices and oscilloscopes and their components;

3. frequency changers, mass spectrometers, flash x-ray machines and their accessories and components, pulse amplifiers, signal generators, equipment for time delay measurement, chromatography and spectrometers;

4. semiconductor devices, integrated circuits and semiconductor materials and equipment for the manufacture of their assemblies, and their components and accessories;

5. semiconductor devices, integrated circuits and semiconductor materials and equipment for testing or inspecting them, and their components and accessories;

6. resists;

7. computers and their accessories and components ;

8. communication devices and their components and accessories;

9. equipment for testing goods stated in 8;

10. materials used for optical fiber for communication devices;

11. cryptographic equipment and its components;

12. underwater detection equipment employing acoustic waves and equipment for positioning vessels, and their components;

13. optical sensors and their components and equipment using optical sensors;

14. electronic cameras and their components;

15. optical filters, fluoride fiber cables, and their components;

16. laser oscillators;

17. magnetometers and their components;

18. gravity meters;

19. radar systems and their components;

20. signal processing equipment (excluding equipment employing elastic waves);

21. equipment and tools for testing, inspecting, or manufacturing the goods and their components stated in 16 and their components and accessories;

22. optical sensing fibers and materials used for optical sensors;

23. fluoride compounds and optical fiber preforms made from these compounds;

24. inertial navigation equipment, direction finding equipment, and avionic equipment, and their components;

25. equipment for inspecting, testing, or manufacturing navigation or avionic equipment;

26. vessels, underwater vision systems and other equipment for underwater activities, underwater diving equipment, and their components and accessories;

27. diesel engines, tractors, and their components and accessories;

28. aircraft, gas turbine engines, and their components;

29. parachutes (including movable parachutes and paragliders) and their components and accessories;

30. vibration testing equipment and their components;

31. equipment for measuring gas turbine engine components, equipment and tools for manufacturing them, and accessories of these equipment and tools;

32. equipment and catalysts for oil refining;

33. quantum computers and other equipment employing quantum properties and their accessories and components;

34. electron microscopes, atomic force and other microscopes, and equipment specially designed for use with these microscopes;

35. additive manufacturing equipment and metal powders and metal alloys it uses;

36. equipment for manufacturing organic light emitting diodes, organic field-effect transistors, or organic photovoltaic cells;

37. equipment for producing microelectromechanical systems;

38. equipment for producing fuels from hydrogen (limited to hydrogen produced by using solar power, wind power, or any other renewable energy) and equipment for manufacturing highly efficient solar cells;

39. vacuum pumps and vacuum gauges;

40. cryogenic refrigeration systems, their accessories, and the components of these systems and accessories;

41. equipment for removing a lid and sealing materials from a packaged integrated circuit;

42. high quantum yield photodetectors;

43. machine tools, their components, and equipment for numerically controlling machine tools;

44. materials that can be used to make detection by electromagnetic waves more difficult, alloys composed of nearly equal proportions of multiple elements, and other advanced materials;

45. conductive polymers, semiconductive polymers, and electroluminescent polymers;

46. water cannon systems for riot or disturbance control and their components and accessories;

47. police batons and similar tools and whips;

48. police helmets and shields and their components;

49. handcuffs, strait jackets and other restraint devices, and their components and accessories;

50. fluids, additives, and high-pressure pumps used for drilling to explore oil or combustible natural gas;

51. ring magnets used as equipment;

52. equipment designed to physically confine radioactive material or shield against radiation;

53. tear gas, liquid pepper, charges, grenades and other explosives, and pyrotechnic articles having dual military and commercial use, and their components;

54. fingerprinting powders, dyes, and ink;

55. personal radiation monitoring dosimeters and other equipment to protect against hazards used in mining and other civil industries, and their components;

56. radiation detection, monitoring, and measurement equipment and radiographic equipment;

57. electrolytic cells, particle accelerators, automatic control systems designed for power industries, Freon and chilled water cooling systems and composite materials, and equipment for producing fibers, prepregs, or preforms;

58. fibers used for composite materials;

59. vaccines, immunotoxins, and medical products containing living organisms, toxins or their subunits or genes used as raw materials of biological warfare agents, and diagnostic and food testing kits;

60. commercially available explosives that contain trimethylenetrinitramine or other energetic materials, detonating fuses, other blasting supplies, and nitrogen trifluoride gas.

61. mixtures that contain substances used as raw materials for chemical warfare agents, substances that are as toxic as chemical warfare agents, or substances used as raw materials for these agents; as well as medical, analytical, diagnostic, and food testing kits that contain substances used as raw materials for chemical warfare agents;

62. polyarylene ether ketones;

63. nickel and copper alloy plates, hardened steel or tungsten carbide precision ball bearings, tributyl phosphate, nitric acid, fluorine, and alpha-emitting radionuclides;

64. explosives or detonator detection equipment and its components;

65. Fluoroscopes and their components;

66. bearings that operate at high speeds, bearings designed to function at high or low temperatures, and magnetic bearings;

67. piping, joints, and valves that are made of stainless steel or other alloys;

68. electromagnetic pumps compatible with molten metals;

69. portable electric generators and their components;

70. bellows sealed valves;

71. machinery for manufacturing or finishing gears;

72. devices for measuring dimensions;

73. robots capable of instantaneously processing information transmitted from sensors and generating or modifying programs or data;

74. assemblies, circuit boards, or inserts designed for use in the goods stated in 43 or in 71 through 73;

75. isostatic presses;

76. equipment for manufacturing bellows;

77. laser welding machines, arc welders, and electron beam welders;

78. nickel and copper alloy equipment;

79. large boring machines and large earth-moving machines used in mining;

80. equipment for electroplating nickel or aluminum;

81. industrial pumps designed to operate in combination with an electric motor;

82. piping, joints, valves, gaskets, and other equipment designed for use in a high vacuum;

83. spin forming and flow forming machines;

84. centrifugal balancing machines;

85. austenitic stainless steel plate, valves, piping, and tanks and other containers;

(ii)-2the goods stated below that have been specified by Order of the Ministry of Economy, Trade and Industry (excluding the goods stated in the preceding three items):

(a)wood and articles of wood, as set forth in the following:

1.sheets for veneering, for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled;

2.casks, barrels, vats, tubs and other coopers' products and parts thereof, of wood;

(b)reservoirs, tanks, vats and similar containers of iron or steel;

(c)interchangeable tools for hand tools, or for machine-tools, and knives and cutting blades for machine or tools;

(d)boilers and machinery and mechanical appliances, and parts and accessories therefor, as set forth in the following:

1.steam or other vapour generating boilers and super-heated water boilers and parts therefor;

2.parts of producer gas or water gas generators, acetylene gas generators and similar water process gas generators;

3.parts of steam turbines;

4.reaction engines, hydraulic power engines and motors and pneumatic power engines and motors;

5.parts of air or vacuum pumps, air or other gas compressors and fans, ventilating or recycling hoods, and gas-tight biological safety cabinets;

6.air conditioning machines;

7.parts of calendering or other rolling machines;

8.centrifuges and parts therefor;

9.mechanical appliances for projecting, dispersing or spraying liquids or powders and parts therefor;

10.pulley tackle and hoists;

11.derricks, cranes, mobile lifting frames, straddle carriers and works trucks fitted with a crane;

12.lifts, conveyors, and other lifting, handling, loading or unloading machinery;

13.bulldozers, angledozers, mechanical shovels, excavators, and shovel loaders;

14.pile-drivers, pile-extractors, coal or rock cutters and tunnelling machinery;

15.machinery for making pulp of fibrous cellulosic material or for finishing paper or paperboard;

16.parts of book-binding machinery;

17.machines for making cartons, boxes, cases, tubes, drums or similar containers;

18.parts of machinery, apparatus and equipment for preparing or making printing components;

19.printing machinery and parts and accessories therefor;

20.machines for extruding, drawing, texturing or cutting manmade textile materials and auxiliary machinery therefor;

21.auxiliary machinery (including components and accessories therefor) for use with machines for preparing textile fibers, machines for producing textile yarns, textile reeling or winding machines, machines for preparing textile yarns, weaving machines, knitting machines, stitch-bonding machines, machines for tufting or machines for making gimped yarn, tulle, lace, embroidery, trimmings, braid or net, and components and accessories;

22.machinery for washing, cleaning, wringing, drying, ironing, pressing, bleaching, dyeing, dressing, finishing, coating or impregnating textile yarns or fabrics, machines for applying the paste to the base fabric or other support, and machines for reeling, unreeling, folding, cutting or pinking textile fabrics, and components therefor;

23.machinery for preparing, tanning or working hides, skins or leather or for making or repairing articles of hides, skins or leather, and components therefor;

24.converters;

25.machine-tools for drilling, boring, milling, threading or tapping metal;

26.machine-tools for planing, shaping, slotting, broaching, gear cutting, gear grinding or gear finishing and other working machine-tools;

27.machine-tools for working wood, cork, bone, hard rubber, hard plastics or similar hard materials, and components and accessories therefor;

28.tool holders and self-opening dieheads;

29.duplicating machines, machines for sorting or folding mail or for inserting mail in envelopes or bands, machines for opening, closing or sealing mail, and machines for affixing or cancelling postage stamps;

30.calculating machines and components and accessories therefor;

31.sorting, screening, separating or washing machines, mixing or kneading machines, machinery for agglomerating or shaping, and machines for forming foundry moulds of sand;

32.machines for manufacturing or hot working glass or glassware, and parts of these machines or machines for assembling electric or electronic lamps, tubes or valves or flashbulbs, in glass envelopes;

33.machinery for working rubber or plastics or for the manufacture of products from these materials;

34.machinery for public works, building or the like, presses and other machinery for treating wood or cork, industrial robots, and parts of these machines, or machinery for the extraction or preparation of animal or fixed vegetable or microbial fats or oil, rope or cable-making machines, evaporative air coolers, passenger boarding bridges, and other machinery;

35.mould bases, moulding patterns and moulds for mineral materials;

36.pressure-reducing valves, valves for oleohydraulic or pneumatic transmissions, safety or relief valves;

37.parts of needle roller bearings and ball bearings or tapered roller bearings;

38.gaskets and similar joints, sets or assortments of gaskets and similar joints, dissimilar in composition, put up in pouches, envelopes or similar packings, and mechanical seal;

(e)electrical machinery and equipment and parts thereof, as set forth in the following;

1.DC motors, DC generators, and rotary converters;

2.transformers;

3.electro-magnetic couplings, clutches and brakes;

4.parts of primary cells;

5.nickel-cadmium electric accumulators;

6.electron beam furnaces;

7.transmission apparatus for radio-broadcasting or television;

8.parts of electrical signalling, safety or traffic control equipment for railways, tramways, roads, inland waterways, parking facilities, port installations or airfields;

9.fixed capacitors;

10.fixed electrical resistors;

11.electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits;

12.arc-lamps;

13.thermionic, cold cathode or photo-cathode valves and tubes and parts thereof;

14.particle accelerators;

15.insulating fittings for electrical machines, and electrical conduit tubing and joints therefor;

(f)rail locomotives, locomotive tenders, railway or tramway maintenance or service vehicle, and open wagons;

(g)vehicles other than railway or tramway rolling-stock, and parts thereof, as set forth in the following:

1.motor vehicles for the transport of goods;

2.special purpose motor vehicles;

3.parts of works trucks, self-propelled or tractors of the type used on railway station platforms;

4.trailers and semi-trailers;

(h)optical, photographic, cinematographic, measuring, checking, or precision instruments and apparatus, and parts and accessories thereof, as set forth in the following:

1.apparatus and equipment for developing photographic or cinematographic film or paper in rolls, for exposing developed film to rolls of photographic paper or for other processing;

2.surveying, hydrographic, oceanographic, hydrological, meteorological or geophysical instruments and appliances, and parts and accessories of these instruments and appliances or rangefinders;

3.revolution counters, production counters, taximeters, mileometers, pedometers and the like;

4.test benches;

5.hydraulic or pneumatic automatic regulating or controlling instruments and apparatus;

(iii)goods set forth in the following and specified by Order of the Ministry of Economy, Trade and Industry (excluding the goods set forth in the preceding items):

(a)alcoholic beverages and ethyl alcohol;

(b)cigars, cheroots, cigarillos and cigarettes (limited to those made of tobacco or of tobacco substitutes);

(c)perfumes and toilet waters and beauty or make-up preparations and preparations for the care of the skin, and other cosmetics;

(d)trunks, suit-cases, vanity-cases, executive-cases, brief-cases, school satchels, handbags, wallets, purses, and similar containers, and braces and other clothing accessories;

(e)fur overcoats and other fur products;

(f)carpets and other textile floor coverings;

(g)tapestries;

(h)ski suits and swimwear, blouses and other garments of silk, shawls of silk, and other clothing accessories;

(i)ski-boots, sports footwear and other footwear;

(j)headgear of leather or other materials (excluding safety headgear and headgear of rubber or of plastics);

(k)porcelain tableware and other articles of porcelain or china;

(l)glassware of lead crystal;

(m)natural or cultured pearls, precious or semi-precious stones and products thereof, silver and gold and products thereof, products of specified metal (excluding silver and gold) and products covered by specified metal;

(n)marine propulsion engines and parts thereof, and potable automatic data processing machines (comprising at least a central processing unit, keyboard, and display);

(o)motor cars and other motor vehicles, motorcycles (including mopeds), cycles fitted with an auxiliary motor, side-cars, and parts and accessories thereof;

(p)breathing appliances and gas masks (excluding protective masks having neither mechanical parts nor replaceable filters);

(q)wristwatches, pocket watches, or other portable watches (including stopwatches and limited to those with a case made of or covered with specified metal) and parts thereof;

(r)grand piano;

(s)works of art, collectors' pieces and antiques.

Appended Table 3 (Re: Article 4)

Argentina, Australia, Austria, Belgium, Bulgaria, Canada, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Luxembourg, Netherlands, New Zealand, Norway, Poland, Portugal, Spain, Sweden, Switzerland, United Kingdom, and United States of America

Appended Table 3-2 (Re: Article 4)

Afghanistan, Central African Republic, Democratic Republic of the Congo, Iraq, Lebanon, Libya, North Korea, Somalia, South Sudan, and Sudan

Appended Table 3-3 (Re: Article 4)

Goods listed in row 5, (xiv) or (xviii); row 7, (ii) or (xv); the middle column of row 8; row 9, (i) or (vi); row 10, (i), (ii), (iv), (vi), (vii), (ix), (ix)-2, or (xi); row 12, (i), (ii), (v), or (vi); or row 13, (v) of Appended Table 1 that have been specified by public notice from the Minister of Economy, Trade and Industry, or goods listed in the middle column of row 15 of that table.

Appended Table 4 (Re: Article 4)

Iran, Iraq, North Korea

Appended Table 4-2 (Re: Article 4)

Deleted

Appended Table 5 (Re: Article 4)

(i)relief supplies provided without charge;

(ii)product samples or advertising materials provided without charge, the total value of which is not more than two million yen (limited to those with a total value not exceeding the amount specified by public notice from the Minister of Economy, Trade and Industry, within the range not exceeding two million yen, if the relevant samples or materials fall under the goods listed in the middle column of Appended Table 2 that have been specified by public notice from the Minister of Economy, Trade and Industry and are exported to the regions listed in the right-hand column of that table that have been specified by public notice from the Minister of Economy, Trade and Industry);

(iii)small packages or small parcels containing personal belongings, household articles, occupational tools or commercial tools that are sent by international mail and are to be used by the receivers for private purposes, or similar parcels sent by other means;

(iv)vessel or aircraft supplies to be used for foreign vessels or aircraft;

(v)aircraft components as well as machines and apparatus mounted on aircraft to be used for the safe arrival, departure, or navigation of aircraft and their components, which need repair and are exported without charge;

(vi)publications to be used by the National Diet Library for the purpose of international exchange;

(vii)goods belonging to the heads of foreign countries visiting Japan, as well as those belonging to their families and attendants;

(viii)goods intended for private use by ambassadors, ministers, or equivalent delegates from foreign countries dispatched to Japan, as well as goods for the private use of staff at diplomatic establishments located in Japan (which means embassies, legations, consulates, and similar facilities; the same applies below), and goods sent from these diplomatic establishments;

(ix)medals, prize cups and trophies, badges and other equivalent objects to be awarded to residents in foreign countries;

(x)goods donated by public organs of Japan to public organs of foreign countries as a gesture of goodwill;

(xi)goods for public use sent to Japanese embassies, legations, consulates, and similar facilities;

(xii)goods exported without charge after being imported to Japan, provided their properties and shape have not changed since importation (excluding those specified by public notice from the Minister of Economy, Trade and Industry);

(xiii)equipment for entertainment purposes imported by entertainers visiting Japan;

(xiv)goods imported by a person without charge, on the condition that they will also be exported without charge, as specified by public notice from the Minister of Economy, Trade and Industry;

(xv)goods imported by a person without charge, on the condition that they will also be exported without charge, as specified by public notice from the Minister of Economy, Trade and Industry.

Appended Table (Re: Article 4)

A person who leaves Japan temporarily and a person who departs from Japan after entering Japan temporarily	(i) Personal effects
	(ii) Occupational tools
A person who departs from Japan with the intention of becoming a permanent resident elsewhere (excluding those who depart from Japan after entering Japan temporarily)	(i) Personal effects
	(ii) Occupational tools
	(iii) Goods to be moved
Ship or aircraft crew	Goods considered to be used for their private purposes

Notes

(i)the term "personal effects" refers to baggage, clothing, documents, cosmetics, personal ornaments, and other goods intended for an individual's private use;

(ii)the term "occupational tools" refers to goods intended for an individual's work-related use;

(iii)the term "goods to be moved" refers to items necessary for an individual or their family to establish and maintain their residence.

Appended Table (Re: Article 4)

	Category of goods	Amount
1	Acetone, ethyl ether, and other goods stated in the middle column of row 21-3 of Appended table 2 which are specified by Order of the Ministry of Economy, Trade and Industry	300,000 yen
2	Goods stated in the middle column of row 19 and row 33 of Appended Table 2	50,000 yen
3	Goods stated in the middle column of row 30 and row 34 of Appended Table 2	30,000 yen